Demo_Galaxy2/ReadMe.md

Find Repositorys

Demo RAD-Galaxy2

General showcase

Short description what will be demonstrated

• VividCAN1:
  Display Vehicle data (see: Demo_Datalogger)
  Slider to change background light
  -> this information will be send to second VividCAN2 to remotely change background light.

  CAN -> CAN2ETH GW -> ETH tapping -> ETH2CAN GW

  Push buttons to send TC10 commands to SFP modules of RAD-GigaStar

• Fire3/Red2:
  Simulating Vehicle data
  Embedded CAN-ETH Gateway

• RAD-Galaxy2:
  Tap device - ETH1 <-> ETH2 / AE01 <-> AE02 streams

• RAD-GigaStar:
  AE simulation (saw signal) - TX on AE01, RX on AE02.
  Embedded CAN-ETH-CAN Gatewaying for CAN1/2 (see Demo_VCAN42-Ind_CAN-ETH-GW) -> to dispaly Vehicle data on VividCAN2
  

• VividCAN2:
  Display same Vehicle data as VividCAN1 but received ofer ethernet and ETH-CAN-GW Backlight can be adjusted localy or over VividCAN1 slider

• VehicleSpy connected to:
  Variant1:
  RAD-GigaStar (device hosting on ETH1) to display Vehicle data (CAN->ETH)
  saw signal from RAD-GigaStar (AE1 and AE2) and on RAD-Galaxy2 (AE3 and AE4 - only receive side)
  Variant2: Red2/Fire3 to show original CAn data

• Wireshark (with ICSCAP):
  Monitoring the whole, tapped streams

Requirements

• "Remote" Datalogger (e.g. neoVI-RED2/Fire3/Connect)
  with CoreMini Setup and replay files File1 and File2
• Two VividCAN with CoreMini Setup
• RAD-Galaxy2
• RAD-GigaStar with CoreMini Setup
  (embedded CAN-ETH-CAN Gateway and device hosting)

Connections

• Red2/Fire3 (DWCAN01) -> VividCAN1 + Power
• Red2/Fire3 (ETH1) -> RAD-Galaxy2 (ETH1)
• RAD-Galaxy2 (AE3) -> RAD-GigaStar (AE1)
• RAD-Galaxy2 (AE4) -> RAD-GigaStar (AE2)
• RAD-Galaxy2 (ETH3) -> RAD-GigaStar (SFP-ETH1)
• RAD-GigaStar (DWCAN01) -> VividCAN2 + Power

Setup I

Showcase - Vehicle Spy

Individual description of setup

Setup II

If multiple setups are available

Showcase - Wireshark

Individual description of setup