106 lines
3.3 KiB
Markdown
106 lines
3.3 KiB
Markdown
# 10-Base-T1S Demos
|
||
|
||
# Check\_10BaseT1S\_Comet\_AE02.vs3
|
||
Check\_10BaseT1S\_Comet\_AE02\_1920x1080.vs3
|
||
|
||
## Graphical panel 1
|
||
|
||
This was started with Betaversion VehicleSpy \_3.9.19.3
|
||
|
||
|
||
|
||
## Graphical panel 2
|
||
|
||
|
||
|
||
|
||
## Graphical panel 3
|
||
|
||
Added for TEX2026
|
||
|
||
|
||
|
||
|
||
## Showcase
|
||
|
||
Initially this setup was used with RAD-Comet. The received messages are filtered by MAC address. Graphical Panel 1:
|
||
Depending on the filtered message the graphical panel shows from which "node" the data was received.
|
||
Graphical Panel 2:
|
||
New setups for [RAD-Comet2](https://store.intrepidcs.com/product/rad-comet-2) and [RAD-Comet3](https://store.intrepidcs.com/product/rad-comet-3) also will be able to show Symbols and Beacon
|
||
Graphical Panel 3:
|
||
For Testing Expo 2026 the setup additionally was extended to use [RAD-Moon-T1S](https://intrepidcs.com/products/automotive-ethernet-tools/rad-moon-t1s-10baset1s-media-converter/) media converter
|
||
and [RAD-GigaStar2](https://intrepidcs.com/products/automotive-ethernet-tools/rad-gigastar2-1gbt1-t1s-active-tap-gateway-media-converter-vehicle-interface-data-logger/).
|
||
Within graphical panel 3 the same waveform from RAD-Meteor Nodes1 and 2 are shown, but received on AE03 of RAD-GigaStar2.
|
||
|
||
WireShark could be used to visualize the 10-Base-T1S to 100-Base-T1 converted stream monitoring the RAD-Moon-T1S output.
|
||
If [ICSCAP](https://intrepidcs.com/products/software/ics-cap/) driver is installed (copy [ICSCAP.exe](https://cdn.intrepidcs.net/icscap/)
|
||
to \\Wireshark\\extcap) also Symbols and Beacon might be monitored – „malformed frames“ since it is no ethernet frame
|
||
but internally extracted data in RAD-GigaStar2, RAD-Moon-T1S or RAD-Comet2/3
|
||
|
||
## Requirements
|
||
|
||
Initial setup
|
||
|
||
- RAD-Comet, RAD-Comet2 or RAD-Comet3
|
||
|
||
- 10-BaseT1S - Local ID=0
|
||
|
||
- two (several) RAD-Meteor including USB-C cable
|
||
|
||
- set with individual local Ids (e.g. ID1 and ID2)
|
||
|
||
- Cabeling to connect RAD-Meteors and RAD-Comet
|
||
|
||
- [iX to Pigtail cable](https://store.intrepidcs.com/product/ix-pt-0.5-cable)
|
||
|
||
- mating terminal blocks for RAD-Meteor [TBP02P1-381-02BE](https://www.digikey.com/en/products/detail/cui-devices/TBP02P1-381-02BE/10238445)
|
||
|
||
- USB-powersupply for x-RAD-Meteor
|
||
|
||
Extended setup
|
||
|
||
- RAD-Moon-T1S (e.g. ID3)
|
||
|
||
- RAD-GigaStar2 (e.g. ID4)
|
||
|
||
## Used Vehicle Spy version
|
||
|
||
Beta 3.9.19.3
|
||
|
||
3.26.2.29 (01.06.2026)
|
||
|
||
## Setup
|
||
|
||
Initial setup
|
||
|
||
1. Connect RAD-Comet 10-Base-T1S port to several RAD-Meteor
|
||
|
||
2. Power the RAD-Meteors via USB
|
||
|
||
3. Connect RAD-Comet via USB-C to the PC
|
||
|
||
Extended setup
|
||
|
||
4. Connect RAD-Moon-T1S to RAD-Comet
|
||
|
||
5. Connect RAD-GigaStar2 to RAD-Moon-T1S
|
||
|
||
6. Connect RAD-Moon-T1S via USB-C and Ethernet to the PC
|
||
|
||
7. Connect RAD-GigaStar2 via USB-C (maybe also with Ethernet) to the PC
|
||
|
||
## Usage
|
||
|
||
1. Open the setup and check
|
||
the RAD-Meteors MAC addesses in the AE02/AE03 and AE06 network settings.\
|
||
(T.B.D might be improved thru global settings with application signals)
|
||
|
||
2. Go online with Vehicle Spy (e.g. with RAD-Comet).
|
||
|
||
3. To start the individual nodes, press the yellow button and start "run".
|
||
|
||
4. Start WireShark and Monitore raw Ethernet stream (RAD-Moon-T1S)
|
||
|
||
5. Have a second instance of WireShark to monitor also the symbols/beacon using ICSCAP connection (e.g. RAD-GigaStar2)
|
||
|