33 lines
1.5 KiB
Markdown
33 lines
1.5 KiB
Markdown
# <u><p style="text-align: center;"> 10-Base-T1S Demos </p></u>
|
|
|
|
# Check_10BaseT1S_Comet_AE02.vs3
|
|
|
|
|
|
## <u>Showcase</u>
|
|
This setup was used with <b>RAD-Comet</b>
|
|
The received messages are filtered by MAC address. Depending on the filtered message the graphical panel shows from which "node" the data was received.
|
|
New setups for [<b>RAD-Comet2</b>](https://store.intrepidcs.com/product/rad-comet-2) and [<b>RAD-Comet3</b>](https://store.intrepidcs.com/product/rad-comet-3) also will
|
|
|
|
## <u>Requirements</u>
|
|
* <b>RAD-Comet</b> - setup was build with RAD-Comet1
|
|
* 10-BaseT1S - Local ID=0
|
|
* several <b>RAD-Meteor</b> including USB-C cable
|
|
* set with individual local IDs
|
|
* <b>Cabeling</b> to connect RAD-Meteors and RAD-Comet
|
|
* [iX to Pigtail cable](https://store.intrepidcs.com/product/ix-pt-0.5-cable)
|
|
* mating terminal blocks for RAD-Meteor [TBP02P1-381-02BE](https://www.digikey.com/en/products/detail/cui-devices/TBP02P1-381-02BE/10238445)
|
|
* USB-powersupply for x-<b>RAD-Meteor</b>
|
|
|
|
## <u>Used Vehicle Spy version</u>
|
|
Beta 3.9.19.3
|
|
|
|
|
|
## <u>Setup</u>
|
|
1) Connect <b>RAD-Comet</b> 10-Base-T1S port to several <b>RAD-Meteor</b>
|
|
2) Power the <b>RAD-Meteors</b> via USB
|
|
3) Connect <b>RAD-Comet</b> via USB-C to the PC
|
|
|
|
## <u>Usage</u>
|
|
1) Open the setup and check the <b>RAD-Meteors</b> MAC addesses in the AE02 network settings.\
|
|
2) Go online with Vehicle Spy. \
|
|
3) To start the individual nodes, press the yellow button and start "run". |