Updated ReadMe.md
intrepid01
parent
c6166195d9
commit
ad6b70df48
117
README.md
117
README.md
|
|
@ -1,33 +1,102 @@
|
|||
# <u><p style="text-align: center;"> 10-Base-T1S Demos </p></u>
|
||||
# 10-Base-T1S Demos
|
||||
|
||||
# Check\_10BaseT1S\_Comet\_AE02.vs3
|
||||
Check\_10BaseT1S\_Comet\_AE02\_1920x1080.vs3
|
||||
|
||||
## Graphical panel 1
|
||||
|
||||
This was started with Betaversion VehicleSpy \_3.9.19.3
|
||||
|
||||
# Check_10BaseT1S_Comet_AE02.vs3
|
||||
|
||||
|
||||
## <u>Showcase</u>
|
||||
This setup was used with <b>RAD-Comet</b>
|
||||
The received messages are filtered by MAC address. Depending on the filtered message the graphical panel shows from which "node" the data was received.
|
||||
New setups for [<b>RAD-Comet2</b>](https://store.intrepidcs.com/product/rad-comet-2) and [<b>RAD-Comet3</b>](https://store.intrepidcs.com/product/rad-comet-3) also will
|
||||
## Graphical panel 2
|
||||
|
||||
## <u>Requirements</u>
|
||||
* <b>RAD-Comet</b> - setup was build with RAD-Comet1
|
||||
* 10-BaseT1S - Local ID=0
|
||||
* several <b>RAD-Meteor</b> including USB-C cable
|
||||
* set with individual local IDs
|
||||
* <b>Cabeling</b> to connect RAD-Meteors and RAD-Comet
|
||||
* [iX to Pigtail cable](https://store.intrepidcs.com/product/ix-pt-0.5-cable)
|
||||
* mating terminal blocks for RAD-Meteor [TBP02P1-381-02BE](https://www.digikey.com/en/products/detail/cui-devices/TBP02P1-381-02BE/10238445)
|
||||
* USB-powersupply for x-<b>RAD-Meteor</b>
|
||||
|
||||
## <u>Used Vehicle Spy version</u>
|
||||
|
||||
|
||||
|
||||
|
||||
## Graphical panel 3
|
||||
|
||||
Added for TEX2026
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
## Showcase
|
||||
|
||||
Initially this setup was used with RAD-Comet. The received messages are filtered by MAC address. Graphical Panel 1:
|
||||
Depending on the filtered message the graphical panel shows from which "node" the data was received.
|
||||
Graphical Panel 2:
|
||||
New setups for [RAD-Comet2](https://store.intrepidcs.com/product/rad-comet-2) and [RAD-Comet3](https://store.intrepidcs.com/product/rad-comet-3) also will be able to show Symbols and Beacon
|
||||
Graphical Panel 3:
|
||||
For Testing Expo 2026 the setup additionally was extended to use RAD-Moon-T1S media converter and RAD-GigaStar2.
|
||||
Within graphical panel 3 the same waveform from RAD-Meteor Nodes1 and 2 are shown, but received on AE03 of RAD-GigaStar2.
|
||||
|
||||
WireShark could be used to visualize the 10-Base-T1S to 100-Base-T1 converted stream monitoring the RAD-Moon-T1S output. If ICSCAP driver is installed (copy ICSCAP.exe to \\Wireshark\\extcap) also Symbols and Beacon might be monitored – „malformed frames“ since it is no ethernet frame but internally extracted date in RAD-GigaStar2, RAD-Moon-T1S or RAD-Comet2/3
|
||||
|
||||
## Requirements
|
||||
|
||||
Initial setup
|
||||
|
||||
- RAD-Comet, RAD-Comet2 or RAD-Comet3
|
||||
|
||||
- 10-BaseT1S - Local ID=0
|
||||
|
||||
- two (several) RAD-Meteor including USB-C cable
|
||||
|
||||
- set with individual local Ids (e.g. ID1 and ID2)
|
||||
|
||||
- Cabeling to connect RAD-Meteors and RAD-Comet
|
||||
|
||||
- [iX to Pigtail cable](https://store.intrepidcs.com/product/ix-pt-0.5-cable)
|
||||
|
||||
- mating terminal blocks for RAD-Meteor [TBP02P1-381-02BE](https://www.digikey.com/en/products/detail/cui-devices/TBP02P1-381-02BE/10238445)
|
||||
|
||||
- USB-powersupply for x-RAD-Meteor
|
||||
|
||||
Extended setup
|
||||
|
||||
- RAD-Moon-T1S (e.g. ID3)
|
||||
|
||||
- RAD-GigaStar2 (e.g. ID4)
|
||||
|
||||
## Used Vehicle Spy version
|
||||
|
||||
Beta 3.9.19.3
|
||||
|
||||
3.26.2.29 (01.06.2026)
|
||||
|
||||
## <u>Setup</u>
|
||||
1) Connect <b>RAD-Comet</b> 10-Base-T1S port to several <b>RAD-Meteor</b>
|
||||
2) Power the <b>RAD-Meteors</b> via USB
|
||||
3) Connect <b>RAD-Comet</b> via USB-C to the PC
|
||||
## Setup
|
||||
|
||||
Initial setup
|
||||
|
||||
1. Connect RAD-Comet 10-Base-T1S port to several RAD-Meteor
|
||||
|
||||
2. Power the RAD-Meteors via USB
|
||||
|
||||
3. Connect RAD-Comet via USB-C to the PC
|
||||
|
||||
Extended setup
|
||||
|
||||
4. Connect RAD-Moon-T1S to RAD-Comet
|
||||
|
||||
5. Connect RAD-GigaStar2 to RAD-Moon-T1S
|
||||
|
||||
6. Connect RAD-Moon-T1S via USB-C and Ethernet to the PC
|
||||
|
||||
7. Connect RAD-GigaStar2 via USB-C (maybe also with Ethernet) to the PC
|
||||
|
||||
## Usage
|
||||
|
||||
1. Open the setup and check the RAD-Meteors MAC addesses in the AE02 network settings.\\
|
||||
|
||||
2. Go online with Vehicle Spy (e.g. with RAD-Comet). \\
|
||||
|
||||
3. To start the individual nodes, press the yellow button and start "run".
|
||||
|
||||
4. Start WireShark and Monitore raw Ethernet stream (RAD-Moon-T1S)
|
||||
|
||||
5. Have a second instance of WireShark to monitor also the symbols/beacon using ICSCAP connection (e.g. RAD-GigaStar2)
|
||||
|
||||
## <u>Usage</u>
|
||||
1) Open the setup and check the <b>RAD-Meteors</b> MAC addesses in the AE02 network settings.\
|
||||
2) Go online with Vehicle Spy. \
|
||||
3) To start the individual nodes, press the yellow button and start "run".
|
||||
Loading…
Reference in New Issue