From ad6b70df4852f92ee96e96ecb51e5e6115cde6e6 Mon Sep 17 00:00:00 2001 From: intrepid01 Date: Mon, 1 Jun 2026 16:13:44 +0200 Subject: [PATCH] Updated ReadMe.md --- README.md | 117 +++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 93 insertions(+), 24 deletions(-) diff --git a/README.md b/README.md index 73bbaf4..d805738 100644 --- a/README.md +++ b/README.md @@ -1,33 +1,102 @@ -#

10-Base-T1S Demos

+# 10-Base-T1S Demos + +# Check\_10BaseT1S\_Comet\_AE02.vs3 +Check\_10BaseT1S\_Comet\_AE02\_1920x1080.vs3 + +## Graphical panel 1 + +This was started with Betaversion VehicleSpy \_3.9.19.3 -# Check_10BaseT1S_Comet_AE02.vs3 ![Setup](resources/Check_10Base-T1S_Comet_GP.bmp) -## Showcase -This setup was used with RAD-Comet -The received messages are filtered by MAC address. Depending on the filtered message the graphical panel shows from which "node" the data was received. -New setups for [RAD-Comet2](https://store.intrepidcs.com/product/rad-comet-2) and [RAD-Comet3](https://store.intrepidcs.com/product/rad-comet-3) also will +## Graphical panel 2 -## Requirements -* RAD-Comet - setup was build with RAD-Comet1 - * 10-BaseT1S - Local ID=0 -* several RAD-Meteor including USB-C cable - * set with individual local IDs -* Cabeling to connect RAD-Meteors and RAD-Comet - * [iX to Pigtail cable](https://store.intrepidcs.com/product/ix-pt-0.5-cable) - * mating terminal blocks for RAD-Meteor [TBP02P1-381-02BE](https://www.digikey.com/en/products/detail/cui-devices/TBP02P1-381-02BE/10238445) -* USB-powersupply for x-RAD-Meteor -## Used Vehicle Spy version + + + + +## Graphical panel 3 + +Added for TEX2026 + + + + + +## Showcase + +Initially this setup was used with RAD-Comet. The received messages are filtered by MAC address. Graphical Panel 1: +Depending on the filtered message the graphical panel shows from which "node" the data was received.  +Graphical Panel 2: +New setups for [RAD-Comet2](https://store.intrepidcs.com/product/rad-comet-2) and [RAD-Comet3](https://store.intrepidcs.com/product/rad-comet-3) also will be able to show Symbols and Beacon +Graphical Panel 3: +For Testing Expo 2026 the setup additionally was extended to use RAD-Moon-T1S media converter and RAD-GigaStar2. +Within graphical panel 3 the same waveform from RAD-Meteor Nodes1 and 2 are shown, but received on AE03 of RAD-GigaStar2. + +WireShark could be used to visualize the 10-Base-T1S to 100-Base-T1 converted stream monitoring the RAD-Moon-T1S output. If ICSCAP driver is installed (copy ICSCAP.exe to \\Wireshark\\extcap) also Symbols and Beacon might be monitored – „malformed frames“ since it is no ethernet frame but internally extracted date in RAD-GigaStar2, RAD-Moon-T1S or RAD-Comet2/3 + +## Requirements + +Initial setup + +- RAD-Comet, RAD-Comet2 or RAD-Comet3 + + - 10-BaseT1S - Local ID=0 + +- two (several) RAD-Meteor including USB-C cable + + - set with individual local Ids (e.g. ID1 and ID2) + +- Cabeling to connect RAD-Meteors and RAD-Comet + + - [iX to Pigtail cable](https://store.intrepidcs.com/product/ix-pt-0.5-cable) + + - mating terminal blocks for RAD-Meteor [TBP02P1-381-02BE](https://www.digikey.com/en/products/detail/cui-devices/TBP02P1-381-02BE/10238445) + +- USB-powersupply for x-RAD-Meteor + +Extended setup + +- RAD-Moon-T1S (e.g. ID3) + +- RAD-GigaStar2 (e.g. ID4) + +## Used Vehicle Spy version + Beta 3.9.19.3 +3.26.2.29 (01.06.2026) -## Setup -1) Connect RAD-Comet 10-Base-T1S port to several RAD-Meteor -2) Power the RAD-Meteors via USB -3) Connect RAD-Comet via USB-C to the PC +## Setup + +Initial setup + +1. Connect RAD-Comet 10-Base-T1S port to several RAD-Meteor + +2. Power the RAD-Meteors via USB + +3. Connect RAD-Comet via USB-C to the PC + +Extended setup + +4. Connect RAD-Moon-T1S to RAD-Comet + +5. Connect RAD-GigaStar2 to RAD-Moon-T1S + +6. Connect RAD-Moon-T1S via USB-C and Ethernet to the PC + +7. Connect RAD-GigaStar2 via USB-C (maybe also with Ethernet) to the PC + +## Usage + +1. Open the setup and check the RAD-Meteors MAC addesses in the AE02 network settings.\\ + +2. Go online with Vehicle Spy (e.g. with RAD-Comet). \\ + +3. To start the individual nodes, press the yellow button and start "run". + +4. Start WireShark and Monitore raw Ethernet stream (RAD-Moon-T1S) + +5. Have a second instance of WireShark to monitor also the symbols/beacon using ICSCAP connection (e.g. RAD-GigaStar2) -## Usage -1) Open the setup and check the RAD-Meteors MAC addesses in the AE02 network settings.\ -2) Go online with Vehicle Spy. \ -3) To start the individual nodes, press the yellow button and start "run". \ No newline at end of file