d4f6c12394
CANPacket: Fix invalid length check
...
This case is already checked above, and further
was invalid since the length had already been
translated to the numeric (0-64) value.
2021-06-10 15:03:34 -04:00
21e93d1f73
CAN: Honor the specified dlcOnWire for transmit
2021-05-21 17:38:00 -04:00
b97f358a0f
Settings: Extra Ethernet settings on ValueCAN 4 and RAD-Pluto
2021-05-10 21:17:31 -04:00
6f8e073fd1
MultiChannelCommunication: Resolve MSVC constexpr warning
2021-05-10 21:16:21 -04:00
07afbebc6d
Settings: Resolve MSVC structure warnings
2021-05-10 21:15:54 -04:00
9ba7320fd3
MSVC: Fix build warnings
2021-05-05 12:51:52 -04:00
f752924a36
Unaligned: Use correct MSVC define
2021-05-05 12:32:29 -04:00
295ba490aa
Settings: Mark termination enables as an unaligned ptr
...
Unfortunately, the termination enables are not always at an aligned
boundary, and MSVC needs to taint the ptr type with __unaligned
in that case.
2021-05-05 03:38:58 -04:00
1bb114004e
Remove unused parameters
...
These can cause warnings (which we treat as errors) on MSVC
2021-05-05 02:40:00 -04:00
e99107c1bc
Device: Allow different Question options for OpenStatus
2021-05-05 02:21:15 -04:00
82113f1a67
Settings: Better handling of the checksum
2021-05-05 02:20:36 -04:00
0006f31844
Network: Mark Main51, OldFormat, and ReadSettings as Internal
2021-05-05 02:18:22 -04:00
595cc36545
Device: Implement version handling
2021-05-05 02:17:38 -04:00
8be3bbaee5
CMake: Use CMAKE_CXX_STANDARD_REQUIRED
2021-05-05 02:16:01 -04:00
72bc5914a6
EthernetPacket: Allow 1 extra byte at the end of the packet
...
ValueCAN 4-2EL sends an extra byte to pad the message
to an even byte count.
2021-05-04 23:25:36 -04:00
eca1110305
ValueCAN 4-2EL: Allow the Ethernet network while communicating over it
...
All frames except for the CAB1/CAB2 communication are reported
2021-05-04 23:08:34 -04:00
b104b34919
Device: Report whether the current driver supports DFU
2021-05-04 22:53:28 -04:00
805ff4f549
ValueCAN 4-2EL: Device reqires PCAP to enumerate over Ethernet
2021-05-04 22:39:33 -04:00
78e3eb18df
Drivers: Rename STM32 to CDC ACM
...
This is much more descriptive of what the driver actually is
2021-05-04 22:37:16 -04:00
6d22b1e001
POSIX: STM32: Check re-enumeration by inode
...
This is much more stable than waiting for a set amount of time
We still timeout at 5s, if we see that being hit it can be increased
2021-05-04 22:22:30 -04:00
b7c7d4349a
Device: Extend open() API for long-running tasks
2021-04-29 19:08:31 -04:00
3d4e0a27e3
Decoder: Pass on short Device messages
2021-04-29 19:07:38 -04:00
0ce52f064b
Event: Better error message for USB powered devices
2021-04-29 18:15:56 -04:00
f629125e67
Build: Allow inheritance of the C++ standard
...
This fixes symbol name incompatibilities when linking with icsneo::optional
between C++ standards.
2021-04-29 18:08:01 -04:00
a63d701839
Event: More user-friendly message for the packet decoding error
2021-04-29 18:07:08 -04:00
622c5ee57a
POSIX: STM32: Handle re-enumeration when changing modes
2021-04-27 21:12:59 -04:00
5733300de6
Extensions: Auto-add linked extensions
2021-04-27 21:12:24 -04:00
65a6fadd1d
Device: Pull out communication close on open error
...
We don't want to close before calling the extension hooks.
2021-04-27 21:07:36 -04:00
8e2883bca9
MultiChannelCommunication: Use generic handleInput
...
This way redirection, and any other changes we
make to the packetizer/dispatch flow, apply to
MultiChannelCommunication as well.
2021-04-23 22:34:32 -04:00
f8355df770
Communication: Block destruction while inside redirectionFn
2021-04-23 22:33:32 -04:00
218648ae5a
Extensions: Offer an opportunity to communicate with a dead device
2021-04-23 22:32:42 -04:00
4cd7bafca7
Device: Allow the suppression of disconnects from extensions
2021-04-23 20:04:02 -04:00
6c1cbc9db8
Optional: Move optional-lite to the include/third-party directory
...
This fixes the use case of adding the include folder
manually to an outside project.
2021-04-23 20:01:53 -04:00
b7ce9819bd
POSIX STM32: Handle large write payloads failing with O_NONBLOCK
2021-04-23 17:06:16 -04:00
55ca6adee6
Communication: Allow redirection of reads
2021-04-23 17:00:37 -04:00
bb7719d185
POSIX Drivers: Clear disconnected status when closing
...
This allows us to properly re-open if we were
previously disconnected.
2021-04-23 16:59:48 -04:00
4b12d3aa4d
EventCallback: Convert indentation to tabs
2021-04-22 13:29:56 -04:00
bb322ad190
neoVI FIRE 2: MiscIO and EMiscIO Support
2021-04-21 10:40:35 -04:00
92589c2ce7
Device: Make IO system thread-safe
2021-04-21 10:04:25 -04:00
3b6b4f0541
C API: Expose icsneo_getNetworkByNumber
2021-04-12 20:20:48 -04:00
40be68e744
C API: Add typedefs for neonetid_t and neonettype_t
2021-04-12 20:20:07 -04:00
e29d63b08c
Add Keysight branding where applicable
...
Because there is now more than one "product name" per device
type, we have a concept of a "generic product name" which
singularly maps onto a device type.
This change comes with a few small breaking changes within
the C++ API:
DeviceType::GetDeviceTypeString has been renamed to
DeviceType::GetGenericProductName to denote that
the returned value is not device specific and
device->getProductName() is preferable.
The member function DeviceType::toString has been renamed
to DeviceType::getGenericProductName for the same reason.
The DeviceType std::ostream& operator<< has been removed
to avoid accidental use of the generic product name.
2021-04-12 19:01:43 -04:00
d79f735df8
Settings: Fix an issue where read errors were not properly reported
...
Since we were not failing the open for a settings read failure,
any errors would go unnoticed.
2021-04-11 22:37:44 -04:00
e82b5d15e0
Support software controllable termination
2021-04-11 22:13:51 -04:00
c8bf1f26da
Examples: C Interactive: Initialize product description to empty string
...
This is a guard in case the icsneo_describeDevice call were to
fail for some reason, and is just good practice regardless.
2021-04-11 22:00:12 -04:00
9ba21d5dc7
C API: Digital IO function use stdbool.h
...
This requirement is already in place and makes the API more consistent
2021-04-11 20:54:59 -04:00
eb5a84132a
EtherBADGE: Device only has one CAN channel
2021-04-08 15:51:56 -04:00
66b0c91cea
Settings: Add missing early return on error to getFDBaudrateFor
2021-04-08 15:05:39 -04:00
7fdae15aed
Network: Update DeviceStatus define to match the standard style
2021-04-07 00:38:49 -04:00
adb972b1f7
Network: Fix defines for C API
2021-04-07 00:35:08 -04:00
Paul Hollinsky