Including <sys/ioctl.h> and <net/if.h> is not sufficient
to musl to find SIOCSIFNAME, so <linux/sockios.h> must be
included too.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Without this patch compilation against musl C library
breaks, because struct timeval cannot be found.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
replaced strcpy(if_name, argv[x]) + ioctl by if_idx = if_nametoindex(argv[x])
to avoid overflows caused by long user input.
Signed-off-by: Sven Schmitt <sven.schmitt@gmx.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Similar to referencing iptables rules by their line number this UID allows to
reference created routing jobs, e.g. to alter configured data modifications.
The UID is an optional non-zero value which can be provided at routing job
creation time. When the UID is set the UID replaces the data modification
configuration as job identification attribute e.g. at job removal time.
The UID option is provided by mainline Linux 4.2+
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
add v command response. Some software like USBtinViewer using v for software version.
Tested on USBtinViewer 1.0
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The result of (last_log_tv.tv_sec - log_tv.tv_sec) is
unsigned long, so use labs() in order not to trim the
value to int. Make skipgap to unsigned long for the same
reason.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
The CAN_RAW socket can set multiple CAN identifier specific filters that lead
to multiple filters in the af_can.c filter processing. These filters are
indenpendent from each other which leads to logical OR'ed filters when applied.
This socket option joines the given CAN filters in the way that only CAN frames
are passed to user space that matched *all* given CAN filters. The semantic for
the applied filters is therefore changed to a logical AND.
This is useful especially when the filterset is a combination of filters where
the CAN_INV_FILTER flag is set in order to notch single CAN IDs or CAN ID
ranges from the incoming traffic.
Example:
candump can0,100~7FF,200~7FF,400~7FF (logical OR'ed filters)
candump can0,100~7FF,200~7FF,400~7FF,J (logical AND'ed filters)
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
outfile is closed as well, so do this symmetrically for infile.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The line discipline number is provided in include/linux/tty.h.
Use that instead of a #define in each program.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Some places used exit(1) and others used exit(EXIT_FAILURE).
Be consistent and use exit(EXIT_FAILURE) for all of these instances.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
slcand has #defines for EXIT_FAILURE and EXIT_SUCCESS but this is
unnecessary since they are already provided by stdlib.h. Remove them.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
The examples in the usage of slcand use a 'ttyslcan0' device which
is an uncommon name. Use a more common ttyUSB0 name which is seen
with CANUSB devices. Also, add an example showing that /dev/ttyUSB0
can be use as well.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
This patch updates the error messages for the reworked state change handling
from Andri Yngvason you find in mainline Linux 3.19+
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Allow to specify the TX and RX padding content separately.
Due to the optional values it is possible to provide either TX or RX values
which enables and set the given values.
-p 55:AA => TX padding 0x55, RX padding 0xAA
-p 55 => TX padding 0x55
-p 55: => TX padding 0x55
-p :AA => RX padding 0xAA
Additionally the comment for the -P <mode> option was updated to point out the
checking mode of the padding in the received PDUs (rx padding).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Enable to pass the optional second extended address with the '-x' option and
do not pollute the command line options with just another '-X' option.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
As requested by Laurent Vaudoit the extended address can be different in the
tx and he rx path:
(..) how can i have a segmented transfer like this:
0x6a7 0x55 0x10 0x08 ........
0x687 0xAA 0x30 0x00 0x00
0x6a7 0x55 0x21 .....
The connection i need is between two ECU, using IDs 0x6a7/687 and one has
adress extension 0x55, the other 0xAA (this adressing method is used on some
FIAT ECUs for example).
http://marc.info/?l=linux-can&m=140354647413513&w=2
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Allow PDU sizes greater than 4095 to be able to check the correct
implementation of the kernel socket API error handlings.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Calculations using unsigned integer types are done modulo U*INT_MAX+1,
so you get the correct difference of two values by simply subtracting.
No special handling for overflow is neccessary.
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
This is necessary so this header gets included when running make dist.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When packaging the can-utils, I understand, that the generation step for
autoconf should be done beforehand. However using the --symlink option in the
autoreconf step installs links instead of the actual files, which leads to a
build failure when trying to build on another host with different autotools
installed.
Signed-off-by: Andre Naujoks <nautsch2@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As requested by Felix Seitz the timeout for screen updates should be
configurable to values smaller than 100ms. Marc Kleine-Budde provided the
original patch to increase the resolution of the timing relevant variables.
The rotating animation was replaced by a rolling screen update counter.
Additionally the CAN-ID is now printed in the same ASCII hex representation
as the CAN data.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Inspired by the SLCAN rework from Andre Naujoks this patch replaces the
extensive use of sprintf() with simple and efficient ASCII helpers.
valgrind/kcachegrind reported a cyle estimation of about 5.3 million cycles
before and about 1.5 million cycles after the rework (factor 3.55) for the
logging of the exact same CAN content.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
The creation of the logfile format was using fprint_canframe() and two other
fprintf() calls to produce a single logfile format line. Instead of using
fprint_canframe() use sprint_canframe() directly and reduce the printf() calls
from three to one.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Large file support (LFS) in recent C libraries allows 32 bit applications to
create large files with file length values > 0x7FFFFFFF when the filesystem
supports it.
This patch adds large file support to the Makefile, if you don't want LFS use
the autotools version and call configure like this:
./configure --disable-largefile
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When printing the current time on the first line the bitstuffing mode is
displayed depending on the command line settings.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Linux build compiles without errors, but Android build
complains about undefined routines and macros.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit
2206f92 canbusload: Add exact CAN frame length calculation (including bitstuffing)
the function to calculate the can_frame_length was moved into a seperate file
(canframelen.c). This patch for the Android makefile adds canframelen.c to the
lib, too and lets canbusload link against the lib.
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Tindell's method used previously is incorrect. It does not account for
the fact that the stuffed bits are themselves also subject to bit stuffing.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This adds an algorithm for calculating the exact number of bits a CAN
frame occupies on the bus and uses this algorithm in canbusload. It
also moves the other methods for CAN frame length calculation, already
present in canbusload, to the new file.
The added algorithm calculates the exact number of stuffed bit in a
CAN frame. Note that in order to calculate that correctly, we must
also know the frame's CRC. Hence, the algorithm also includes CRC
calculation routine.
The correctness of the algorithm was verified on an oscilloscope for
several different SFF and EFF frames.
Currently only CAN frames are supported. For CANFD frames, a different
algorithm is needed. CANFD uses different CRC polynomials and
calculates the CRC from the staffed bit-stream (CAN calculates CRC
from de-stuffed bit-stream).
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Yegor Yefremov
Marc Kleine-Budde
Sven Schmitt
Oliver Hartkopp
bombilee
Robert Schwebel
Jeremiah Mahler
Andri Yngvason
Urs Thuermann
Alexander Stein
Andre Naujoks
Wolfgang Grandegger
Michal Sojka