// -------------------------------------------------------------------------- // COPYRIGHT INTREPID CONTROL SYSTEMS, INC. (c) 1994-20xx // Confidential and proprietary. This document and its contents are the // property of Intrepid Control Systems, Inc. It is not to be copied, // distributed, or otherwise disclosed or used without the prior written // consent of Intrepid Control Systems Inc. // All rights reserved. // -------------------------------------------------------------------------- // SPY Status Bit Definitions // Generated automatically - DO NOT MODIFY // Modify cicsSpyStatusBits_config.yml and run cicsSpyStatusBits_gen.py // Generated on: 2025-07-14 14:31:40 #ifndef CICSSPYSTATUSBITS_H_ #define CICSSPYSTATUSBITS_H_ 1 // WARNING: The following bit conflicts were detected: // spystatus value 0x10000000: // VSI value 'SPY_STATUS_VSI_IFR_CRC_BIT' conflicts with common value 'SPY_STATUS_PDU' // spystatus value 0x10000000: // A2B value 'SPY_STATUS_A2B_CONTROL' conflicts with common value 'SPY_STATUS_PDU' // spystatus value 0x08: // A2B value 'SPY_STATUS_A2B_SCF_VALID_WAITING' conflicts with common value 'SPY_STATUS_REMOTE_FRAME' // spystatus value 0x40000000: // A2B value 'SPY_STATUS_A2B_UPSTREAM' conflicts with common value 'SPY_STATUS_HIGH_SPEED' // spystatus value 0x10000000: // FLEXRAY value 'SPY_STATUS_FLEXRAY_PDU' conflicts with common value 'SPY_STATUS_PDU' // spystatus value 0x40000000: // FLEXRAY value 'SPY_STATUS_FLEXRAY_PDU_UPDATE_BIT_SET' conflicts with common value 'SPY_STATUS_HIGH_SPEED' // spystatus value 0x08: // FLEXRAY value 'SPY_STATUS_FLEXRAY_PDU_NO_UPDATE_BIT' conflicts with common value 'SPY_STATUS_REMOTE_FRAME' // Glyph definitions // '|' - byte divider // '.' - nibble divider // '-' - unused bit // 'o' - common bit // 'x' - protocol specific bit // '!' - conflict bit // SPYSTATUS bit definitions // SPYSTATUS - Common bits // |oo-o.oooo|oooo.oooo|oooo.oo-o|oo-o.oooo| #define SPY_STATUS_GLOBAL_ERR 0x01 // Global error flag #define SPY_STATUS_TX_MSG 0x02 // Transmitted message #define SPY_STATUS_XTD_FRAME 0x04 // Extended frame #define SPY_STATUS_REMOTE_FRAME 0x08 // Remote frame #define SPY_STATUS_CRC_ERROR 0x10 // CRC error #define SPY_STATUS_INCOMPLETE_FRAME 0x40 // Incomplete frame #define SPY_STATUS_LOST_ARBITRATION 0x80 // Lost arbitration #define SPY_STATUS_UNDEFINED_ERROR 0x0100 // Undefined error #define SPY_STATUS_BUS_RECOVERED 0x0400 // Bus recovered #define SPY_STATUS_BUS_SHORTED_PLUS 0x0800 // Bus shorted to plus #define SPY_STATUS_BUS_SHORTED_GND 0x1000 // Bus shorted to ground #define SPY_STATUS_CHECKSUM_ERROR 0x2000 // Checksum error #define SPY_STATUS_BAD_MESSAGE_BIT_TIME_ERROR 0x4000 // Bad message bit time error #define SPY_STATUS_TX_NOMATCH 0x8000 // TX no match #define SPY_STATUS_COMM_IN_OVERFLOW 0x010000 // Communication input overflow #define SPY_STATUS_EXPECTED_LEN_MISMATCH 0x020000 // Expected length mismatch #define SPY_STATUS_MSG_NO_MATCH 0x040000 // Message no match #define SPY_STATUS_BREAK 0x080000 // Break detected #define SPY_STATUS_AVSI_REC_OVERFLOW 0x100000 // AVSI record overflow #define SPY_STATUS_TEST_TRIGGER 0x200000 // Test trigger #define SPY_STATUS_AUDIO_COMMENT 0x400000 // Audio comment #define SPY_STATUS_GPS_DATA 0x800000 // GPS data #define SPY_STATUS_ANALOG_DIGITAL_INPUT 0x01000000 // Analog digital input #define SPY_STATUS_TEXT_COMMENT 0x02000000 // Text comment #define SPY_STATUS_NETWORK_MESSAGE_TYPE 0x04000000 // Network message type #define SPY_STATUS_VSI_TX_UNDERRUN 0x08000000 // VSI TX underrun #define SPY_STATUS_PDU 0x10000000 // PDU message #define SPY_STATUS_HIGH_SPEED 0x40000000 // High speed #define SPY_STATUS_EXTENDED 0x80000000 // Extended - if this bit is set than decode StatusBitField3 in AckBytes // SPYSTATUS - A2B protocol bits // |o!x!.oooo|oooo.oooo|oooo.oo-o|oo-o.!ooo| #define SPY_STATUS_A2B_SCF_VALID_WAITING 0x08 // A2B SCF valid waiting #define SPY_STATUS_A2B_CONTROL 0x10000000 // A2B control message #define SPY_STATUS_A2B_MONITOR 0x20000000 // A2B monitor message #define SPY_STATUS_A2B_UPSTREAM 0x40000000 // A2B upstream message // SPYSTATUS - CAN protocol bits // |ooxo.oooo|oooo.oooo|oooo.ooxo|ooxo.oooo| #define SPY_STATUS_CAN_ERROR_PASSIVE 0x20 // CAN error passive state #define SPY_STATUS_CAN_BUS_OFF 0x0200 // CAN bus off state #define SPY_STATUS_CANFD 0x20000000 // CAN FD frame // SPYSTATUS - ETHERNET protocol bits // |oo-o.oooo|oooo.oooo|oooo.oo-o|ooxo.oooo| #define SPY_STATUS_HEADERCRC_ERROR 0x20 // Header CRC error // SPYSTATUS - FLEXRAY protocol bits // |o!-!.oooo|oooo.oooo|oooo.oo-o|oo-o.!ooo| #define SPY_STATUS_FLEXRAY_PDU_NO_UPDATE_BIT 0x08 // FlexRay PDU no update bit #define SPY_STATUS_FLEXRAY_PDU 0x10000000 // FlexRay PDU (alias for SPY_STATUS_PDU) #define SPY_STATUS_FLEXRAY_PDU_UPDATE_BIT_SET 0x40000000 // FlexRay PDU update bit set // SPYSTATUS - LIN protocol bits // |ooxo.oooo|oooo.oooo|oooo.oo-o|oo-o.oooo| #define SPY_STATUS_LIN_MASTER 0x20000000 // LIN master message // SPYSTATUS - VSI protocol bits // |oox!.oooo|oooo.oooo|oooo.oo-o|oo-o.oooo| #define SPY_STATUS_VSI_IFR_CRC_BIT 0x10000000 // VSI IFR CRC bit #define SPY_STATUS_INIT_MESSAGE 0x20000000 // Initialization message // SPYSTATUS2 bit definitions // SPYSTATUS2 - Common bits // |----.----|---o.--oo|----.----|----.oooo| #define SPY_STATUS2_HAS_VALUE 0x01 #define SPY_STATUS2_VALUE_IS_BOOLEAN 0x02 #define SPY_STATUS2_HIGH_VOLTAGE 0x04 #define SPY_STATUS2_LONG_MESSAGE 0x08 #define SPY_STATUS2_GLOBAL_CHANGE 0x010000 #define SPY_STATUS2_ERROR_FRAME 0x020000 #define SPY_STATUS2_END_OF_LONG_MESSAGE 0x100000 // SPYSTATUS2 - CAN protocol bits // |----.----|-xxo.--oo|----.----|----.oooo| #define SPY_STATUS2_CAN_ISO15765_LOGICAL_FRAME 0x200000 #define SPY_STATUS2_CAN_HAVE_LINK_DATA 0x400000 // SPYSTATUS2 - ETHERNET protocol bits // |xxxx.xxxx|xxxo.--oo|----.----|----.oooo| #define SPY_STATUS2_ETHERNET_CRC_ERROR 0x200000 #define SPY_STATUS2_ETHERNET_FRAME_TOO_SHORT 0x400000 #define SPY_STATUS2_ETHERNET_FCS_AVAILABLE 0x800000 // This frame contains FCS (4 bytes) obtained from ICS Ethernet hardware (ex. RAD-STAR) #define SPY_STATUS2_ETHERNET_NO_PADDING 0x01000000 #define SPY_STATUS2_ETHERNET_PREEMPTION_ENABLED 0x02000000 #define SPY_STATUS2_ETHERNET_UPDATE_CHECKSUMS 0x04000000 #define SPY_STATUS2_ETHERNET_MANUALFCS_ENABLED 0x08000000 #define SPY_STATUS2_ETHERNET_FCS_VERIFIED 0x10000000 #define SPY_STATUS2_ETHERNET_T1S_SYMBOL 0x20000000 #define SPY_STATUS2_ETHERNET_T1S_BURST 0x40000000 #define SPY_STATUS2_ETHERNET_T1S_ETHERNET 0x80000000 // SPYSTATUS2 - FLEXRAY protocol bits // |----.-xxx|xxxo.--oo|----.----|----.oooo| #define SPY_STATUS2_FLEXRAY_TX_AB 0x200000 #define SPY_STATUS2_FLEXRAY_TX_AB_NO_A 0x400000 #define SPY_STATUS2_FLEXRAY_TX_AB_NO_B 0x800000 #define SPY_STATUS2_FLEXRAY_TX_AB_NO_MATCH 0x01000000 #define SPY_STATUS2_FLEXRAY_NO_CRC 0x02000000 #define SPY_STATUS2_FLEXRAY_NO_HEADERCRC 0x04000000 // // SPYSTATUS2 - I2C protocol bits // |----.----|xxxo.--oo|----.----|----.oooo| #define SPY_STATUS2_I2C_ERR_TIMEOUT 0x200000 #define SPY_STATUS2_I2C_ERR_NACK 0x400000 #define SPY_STATUS2_I2C_DIR_READ 0x800000 // SPYSTATUS2 - ISO protocol bits // |-xxx.x---|---o.--oo|----.----|----.oooo| #define SPY_STATUS2_ISO_FRAME_ERROR 0x08000000 // ISO frame error #define SPY_STATUS2_ISO_OVERFLOW_ERROR 0x10000000 // ISO overflow error #define SPY_STATUS2_ISO_PARITY_ERROR 0x20000000 // ISO parity error #define SPY_STATUS2_ISO_RX_TIMEOUT_ERROR 0x40000000 // ISO specific timeout error // SPYSTATUS2 - LIN protocol bits // |xxxx.xxxx|xxxo.--oo|----.----|----.oooo| #define SPY_STATUS2_LIN_ERR_RX_BREAK_NOT_0 0x200000 // LIN RX break not 0 error #define SPY_STATUS2_LIN_ERR_RX_BREAK_TOO_SHORT 0x400000 // LIN RX break too short error #define SPY_STATUS2_LIN_ERR_RX_SYNC_NOT_55 0x800000 // LIN RX sync not 0x55 error #define SPY_STATUS2_LIN_ERR_RX_DATA_GREATER_8 0x01000000 // LIN RX data greater than 8 bytes error #define SPY_STATUS2_LIN_ERR_TX_RX_MISMATCH 0x02000000 // LIN TX/RX mismatch error #define SPY_STATUS2_LIN_ERR_MSG_ID_PARITY 0x04000000 // LIN message ID parity error #define SPY_STATUS2_LIN_SYNC_FRAME_ERROR 0x08000000 // LIN sync frame error #define SPY_STATUS2_LIN_ID_FRAME_ERROR 0x10000000 // LIN ID frame error #define SPY_STATUS2_LIN_SLAVE_BYTE_ERROR 0x20000000 // LIN slave byte error #define SPY_STATUS2_LIN_RX_TIMEOUT_ERROR 0x40000000 // RX timeout error #define SPY_STATUS2_LIN_NO_SLAVE_DATA 0x80000000 // LIN no slave data // SPYSTATUS2 - MDIO protocol bits // |-xxx.xxxx|xxxo.--oo|----.----|----.oooo| #define SPY_STATUS2_MDIO_ERR_TIMEOUT 0x200000 #define SPY_STATUS2_MDIO_JOB_CANCELLED 0x400000 #define SPY_STATUS2_MDIO_INVALID_BUS 0x800000 #define SPY_STATUS2_MDIO_INVALID_PHYADDR 0x01000000 #define SPY_STATUS2_MDIO_INVALID_REGADDR 0x02000000 #define SPY_STATUS2_MDIO_UNSUPPORTED_CLAUSE 0x04000000 #define SPY_STATUS2_MDIO_UNSUPPORTED_OPCODE 0x08000000 #define SPY_STATUS2_MDIO_OVERFLOW 0x10000000 #define SPY_STATUS2_MDIO_CLAUSE45 0x20000000 #define SPY_STATUS2_MDIO_READ 0x40000000 // SPYSTATUS2 - MOST protocol bits // |xxxx.xxxx|xxxo.--oo|----.----|----.oooo| #define SPY_STATUS2_MOST_PACKET_DATA 0x200000 #define SPY_STATUS2_MOST_STATUS 0x400000 // reflects changes in light/lock/MPR/SBC/etc... #define SPY_STATUS2_MOST_LOW_LEVEL 0x800000 // MOST low level message, allocs, deallocs, remote requests...*/ #define SPY_STATUS2_MOST_CONTROL_DATA 0x01000000 #define SPY_STATUS2_MOST_MHP_USER_DATA 0x02000000 // MOST HIGH User Data Frame #define SPY_STATUS2_MOST_MHP_CONTROL_DATA 0x04000000 // MOST HIGH Control Data #define SPY_STATUS2_MOST_I2S_DUMP 0x08000000 #define SPY_STATUS2_MOST_TOO_SHORT 0x10000000 #define SPY_STATUS2_MOST_MOST50 0x20000000 // absence of MOST50 and MOST150 implies it's MOST25 #define SPY_STATUS2_MOST_MOST150 0x40000000 #define SPY_STATUS2_MOST_CHANGED_PAR 0x80000000 // first byte in ack reflects what changed. // SPYSTATUS2 - WBMS protocol bits // |----.----|--xo.--oo|----.----|----.oooo| #define SPY_STATUS2_WBMS_API_IS_CALLBACK 0x200000 // SPYSTATUS3 bit definitions // SPYSTATUS3 - CAN protocol bits // |----.----|-xxx.xxxx|-xxx.xxxx|----.-xxx| #define SPY_STATUS3_CAN_ERR_PASSIVE 0x01 // CAN error passive state: typically when error counter is > 127 #define SPY_STATUS3_CAN_BUS_OFF 0x02 // CAN bus off state #define SPY_STATUS3_CAN_ERR_WARNING 0x04 // CAN error warning: typically when error counter is > 96 #define SPY_STATUS3_CAN_DATAERR_STUFF_ERROR 0x0100 // CAN stuff error during the data payload phase #define SPY_STATUS3_CAN_DATAERR_FORM_ERROR 0x0200 // CAN form error during the data payload phase #define SPY_STATUS3_CAN_DATAERR_ACK_ERROR 0x0400 // CAN ack error during the data payload phase #define SPY_STATUS3_CAN_DATAERR_BIT1_ERROR 0x0800 // CAN bit1 error during the data payload phase #define SPY_STATUS3_CAN_DATAERR_BIT0_ERROR 0x1000 // CAN bit0 error during the data payload phase #define SPY_STATUS3_CAN_DATAERR_CRC_ERROR 0x2000 // CAN CRC error during the data payload phase #define SPY_STATUS3_CAN_DATAERR_NOCHANGE 0x4000 // CAN data error occurred before and no change yet #define SPY_STATUS3_CAN_GENERR_STUFF_ERROR 0x010000 // CAN stuff error at the general frame level #define SPY_STATUS3_CAN_GENERR_FORM_ERROR 0x020000 // CAN form error at the general frame level #define SPY_STATUS3_CAN_GENERR_ACK_ERROR 0x040000 // CAN ack error at the general frame level #define SPY_STATUS3_CAN_GENERR_BIT1_ERROR 0x080000 // CAN bit1 error at the general frame level #define SPY_STATUS3_CAN_GENERR_BIT0_ERROR 0x100000 // CAN bit0 error at the general frame level #define SPY_STATUS3_CAN_GENERR_CRC_ERROR 0x200000 // CAN CRC error at the general frame level #define SPY_STATUS3_CAN_GENERR_NOCHANGE 0x400000 // CAN frame Error occurred before and no change yet // SPYSTATUS3 - CANFD protocol bits // |----.----|----.----|----.----|---x.xxxx| #define SPY_STATUS3_CANFD_ESI 0x01 // CAN FD Error State Indicator (ESI) reflects the error state of the transmitting node #define SPY_STATUS3_CANFD_IDE 0x02 // CAN FD Identifier Extension (IDE) indicates if standard or extended IDs are in use #define SPY_STATUS3_CANFD_RTR 0x04 #define SPY_STATUS3_CANFD_FDF 0x08 // CAN FD Format (FDF) flag -- distinguishes classic CAN from CANFD #define SPY_STATUS3_CANFD_BRS 0x10 // CANFD Baud Rate Select (BRS) flag, indicates if the data portion transmits at a higher bitrate // SPYSTATUS3 - ETHERNET protocol bits // |----.----|----.----|----.----|----.--xx| #define SPY_STATUS3_ETHERNET_TX_COLLISION 0x01 #define SPY_STATUS3_ETHERNET_T1S_WAKE 0x02 // SPYSTATUS3 - LIN protocol bits // |----.----|----.----|----.----|----.-xxx| #define SPY_STATUS3_LIN_JUST_BREAK_SYNC 0x01 #define SPY_STATUS3_LIN_SLAVE_DATA_TOO_SHORT 0x02 #define SPY_STATUS3_LIN_ONLY_UPDATE_SLAVE_TABLE_ONCE 0x04 // SPYSTATUS4 bit definitions // SPYSTATUS4 - ETHERNET protocol bits // |----.----|----.----|----.----|----.--xx| #define SPY_STATUS4_ETH_CRC_ERROR 0x01 // Ethernet CRC error #define SPY_STATUS4_ETH_FRAME_TOO_LONG 0x02 // Ethernet frame too long #endif // CICSSPYSTATUSBITS_H_