api/icsneocpp/event.cpp

@@ -63,8 +63,8 @@ static constexpr const char* NO_SERIAL_NUMBER_12V = "Communication could not be
 static constexpr const char* NO_SERIAL_NUMBER = "Communication could not be established with the device. Perhaps it is not powered or requires a firmware update using Vehicle Spy.";
 static constexpr const char* INCORRECT_SERIAL_NUMBER = "The device did not return the expected serial number!";
 static constexpr const char* SETTINGS_READ = "The device settings could not be read.";
-static constexpr const char* SETTINGS_VERSION = "The settings version is incorrect, please update your firmware with ICS Device Manager.";
-static constexpr const char* SETTINGS_LENGTH = "The settings length is incorrect, please update your firmware with ICS Device Manager.";
+static constexpr const char* SETTINGS_VERSION = "The settings version is incorrect, please update your firmware with neoVI Explorer.";
+static constexpr const char* SETTINGS_LENGTH = "The settings length is incorrect, please update your firmware with neoVI Explorer.";
 static constexpr const char* SETTINGS_CHECKSUM = "The settings checksum is incorrect, attempting to set defaults may remedy this issue.";
 static constexpr const char* SETTINGS_NOT_AVAILABLE = "Settings are not available for this device.";
 static constexpr const char* SETTINGS_READONLY = "Settings are read-only for this device.";

docs/icsneopy/flexray_getting_started.rst

@@ -127,7 +127,7 @@ FlexRay Coldstart Configuration
 
 To use the Coldstart example, ensure the following:
 
-Set the Flexray network in ICS Device Manager to Coldstart.
+Set the Flexray network in neoVI Explorer to Coldstart.
 
 No other nodes should be present on the network during testing.
 

examples/cpp/a2b/src/a2b.cpp

@@ -406,9 +406,6 @@ int main(int argc, char** argv) {
 
 	if(it == devices.end()) {
 		std::cerr << "Could not find RAD-A2B." << std::endl;
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cerr << lastError << std::endl;
 		return EXIT_FAILURE;
 	}
 

examples/cpp/analog_out/src/analog_out.cpp

@@ -92,9 +92,6 @@ int main(int argc, const char** argv) {
 		
 		if(!device) {
 			std::cerr << "Device with serial " << serial << " not found" << std::endl;
-			auto lastError = icsneo::GetLastError();
-			if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-				std::cerr << lastError << std::endl;
 			return -1;
 		}
 	} else {
@@ -102,9 +99,6 @@ int main(int argc, const char** argv) {
 		auto devices = icsneo::FindAllDevices();
 		if(devices.empty()) {
 			std::cerr << "No devices found" << std::endl;
-			auto lastError = icsneo::GetLastError();
-			if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-				std::cerr << lastError << std::endl;
 			return -1;
 		}
 		device = devices[0];

examples/cpp/apperror/src/AppErrorExample.cpp

@@ -9,7 +9,7 @@
 /*
  * App errors are responses from the device indicating internal runtime errors
  * NOTE: To trigger the app error in this example, disable the DW CAN 01 network on the device 
- * (e.g. with ICS Device Manager)
+ * (e.g. with neoVI Explorer)
  */
 int main() {
 	std::cout << "Running libicsneo " << icsneo::GetVersion() << std::endl;
@@ -17,13 +17,6 @@ int main() {
 	auto devices = icsneo::FindAllDevices();
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
-		return 0;
-	}
-
 	// List off the devices
 	for(auto& device : devices)
 		std::cout << '\t' << device->describe() << " @ Handle " << device->getNeoDevice().handle << std::endl;

examples/cpp/coremini/src/coremini.cpp

@@ -33,9 +33,6 @@ int main(int argc, char** argv) {
 
 	if(it == devices.end()) {
 		std::cout << "Failed to find device." << std::endl;
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
 		return EXIT_FAILURE;
 	}
 

examples/cpp/diskformat/src/DiskFormatExample.cpp

@@ -12,9 +12,7 @@ int main() {
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
 	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
+		std::cout << "error: no devices found" << std::endl;
 		return -1;
 	}
 

examples/cpp/flexray/src/FlexRayExample.cpp

@@ -138,12 +138,6 @@ std::vector<std::shared_ptr<icsneo::FlexRayMessage>> makeDummyFlexRayMessages(si
 
 int main() {
     auto devices = icsneo::FindAllDevices();
-    if(devices.empty()) {
-        auto lastError = icsneo::GetLastError();
-        if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-            std::cerr << lastError << std::endl;
-        return -1;
-    }
     std::shared_ptr<icsneo::Device> flexrayDevice = nullptr;
     for (auto&& device : devices) {
         if (device->getExtension("FlexRay")) {

examples/cpp/lin/src/LINExample.cpp

@@ -15,13 +15,6 @@ int main() {
 	// You now hold the shared_ptrs for these devices, you are considered to "own" these devices from a memory perspective
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
-		return 0;
-	}
-
 	// List off the devices
 	for(auto& device : devices)
 		std::cout << '\t' << device->describe() << " @ Handle " << device->getNeoDevice().handle << std::endl;

examples/cpp/livedata/src/LiveDataExample.cpp

@@ -14,13 +14,6 @@ int main() {
 	auto devices = icsneo::FindAllDevices(); // This is type std::vector<std::shared_ptr<icsneo::Device>>
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
-		return 0;
-	}
-
 	// List off the devices
 	for(auto& device : devices)
 		std::cout << '\t' << device->describe() << " @ Handle " << device->getNeoDevice().handle << std::endl;

examples/cpp/macsec/src/macsec.cpp

@@ -9,10 +9,8 @@ int main(int, char**) {
 
 	auto devices = icsneo::FindAllDevices();
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
+	if(devices.size() == 0) {
+		std::cout << "No device found" << std::endl;
 		return -1;
 	}
 

examples/cpp/mdio/src/MDIOExample.cpp

@@ -48,13 +48,6 @@ int main()
 	// You now hold the shared_ptrs for these devices, you are considered to "own" these devices from a memory perspective
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
-		return 0;
-	}
-
 	// List off the devices
 	for (auto &device : devices)
 		std::cout << '\t' << device->describe() << " @ Handle " << device->getNeoDevice().handle << std::endl;

examples/cpp/mutex/src/MutexExample.cpp

@@ -76,13 +76,6 @@ int main() {
 	// You now hold the shared_ptrs for these devices, you are considered to "own" these devices from a memory perspective
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
-		return 0;
-	}
-
 	// List off the devices
 	for(auto& device : devices)
 		std::cout << '\t' << device->describe() << " @ Handle " << device->getNeoDevice().handle << std::endl;

examples/cpp/simple/src/SimpleExample.cpp

@@ -22,13 +22,6 @@ int main() {
 	// You now hold the shared_ptrs for these devices, you are considered to "own" these devices from a memory perspective
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 
-	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
-		return 0;
-	}
-
 	// List off the devices
 	for(auto& device : devices)
 		std::cout << '\t' << device->describe() << " @ Handle " << device->getNeoDevice().handle << std::endl;
@@ -346,7 +339,7 @@ int main() {
 				if(val.has_value())
 					std::cout << " - OK (" << val.value() << "V)" << std::endl;
 				else
-					std::cout << " - FAIL, it may need to be enabled in ICS Device Manager (" << icsneo::GetLastError() << ")" << std::endl;
+					std::cout << " - FAIL, it may need to be enabled in neoVI Explorer (" << icsneo::GetLastError() << ")" << std::endl;
 			}
 		}
 

examples/cpp/spi/src/spi.cpp

@@ -86,9 +86,6 @@ int main(int argc, const char** argv) {
 	}
 	if(!device) {
 		std::cerr << "Failed to find device" << std::endl;
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cerr << lastError << std::endl;
 		std::cerr << usage;
 		return -1;
 	}

examples/cpp/t1s/src/T1SSettingsExample.cpp

@@ -217,9 +217,7 @@ int main() {
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 	
 	if (devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
+		std::cout << "No devices found!" << std::endl;
 		return 1;
 	}
 	

examples/cpp/t1s/src/T1SSymbolDecodingExample.cpp

@@ -261,9 +261,7 @@ int main() {
 	std::cout << "OK, " << devices.size() << " device" << (devices.size() == 1 ? "" : "s") << " found" << std::endl;
 	
 	if (devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cerr << lastError << std::endl;
+		std::cerr << "No devices found!" << std::endl;
 		return 1;
 	}
 	

examples/cpp/vsa/src/VSAExample.cpp

@@ -106,9 +106,7 @@ int main(int argc, char* argv[]) {
 
 	auto devices = icsneo::FindAllDevices();
 	if(devices.empty()) {
-		auto lastError = icsneo::GetLastError();
-		if(lastError.getType() != icsneo::APIEvent::Type::NoErrorFound)
-			std::cout << lastError << std::endl;
+		std::cout << "error: no devices found" << std::endl;
 		return -1;
 	}