Device: Conditionally retrieve component versions

HARDWARE.md

@@ -21,6 +21,9 @@
 		- CAN works
 		- CAN FD works
 		- Ethernet works
+	- RADComet3
+		- CAN works
+		- Ethernet works
 
 - Connecting over USB
 	- ValueCAN 4 series
@@ -47,4 +50,7 @@
 	- RADA2B
 		- CAN works
 		- Ethernet works
-	- RADMoon3
+	- RADMoon3
+	- RADComet3
+		- CAN works
+		- Ethernet works

device/device.cpp

@@ -220,10 +220,13 @@ bool Device::open(OpenFlags flags, OpenStatusHandler handler) {
 
 	// Get component versions *after* the extension "onDeviceOpen" hooks (e.g. device reflashes)
 	
-	if (auto compVersions = com->getComponentVersionsSync())
-		componentVersions = std::move(*compVersions);
-	else
-		report(APIEvent::Type::NoDeviceResponse, APIEvent::Severity::EventWarning);
+	if(supportsComponentVersions()) {
+		if(auto compVersions = com->getComponentVersionsSync())
+			componentVersions = std::move(*compVersions);
+		else
+			// It's possible the device is on older firmware so don't return false here
+			report(APIEvent::Type::NoDeviceResponse, APIEvent::Severity::EventWarning);
+	}
 
 	if(!settings->disabled) {
 		// Since we will not fail the open if a settings read fails,

device/devicefinder.cpp

@@ -177,6 +177,10 @@ std::vector<std::shared_ptr<Device>> DeviceFinder::FindAll() {
 		makeIfSerialRangeMatches<RADComet2>(dev, newFoundDevices);
 		#endif
 
+		#ifdef __RADCOMET3_H_
+		makeIfSerialMatches<RADComet3>(dev, newFoundDevices);
+		#endif
+
 		#ifdef __RADEPSILON_H_
 		makeIfSerialMatches<RADEpsilon>(dev, newFoundDevices);
 		#endif
@@ -315,6 +319,10 @@ const std::vector<DeviceType>& DeviceFinder::GetSupportedDevices() {
 		#ifdef __RADCOMET_H_
 		RADComet::DEVICE_TYPE,
 		#endif
+
+		#ifdef __RADCOMET3_H_
+		RADComet3::DEVICE_TYPE,
+		#endif
 		
 		#ifdef __RADEPSILON_H_
 		RADEpsilon::DEVICE_TYPE,

include/icsneo/device/device.h

@@ -715,6 +715,8 @@ public:
 
 	virtual bool isOnlineSupported() const { return true; }
 
+	virtual bool supportsComponentVersions() const { return false; }
+
 protected:
 	bool online = false;
 	int messagePollingCallbackID = 0;

include/icsneo/device/devicetype.h

@@ -50,6 +50,7 @@ public:
 		RADMoon3 = (0x00000023),
 		RADComet = (0x00000024),
 		FIRE3_FlexRay = (0x00000025),
+		RADComet3 = (0x00000027),
 		RED = (0x00000040),
 		ECU = (0x00000080),
 		IEVB = (0x00000100),
@@ -186,6 +187,8 @@ public:
 				return "neoOBD2 SIM";
 			case FIRE3_FlexRay:
 				return "neoVI FIRE3 FlexRay";
+			case RADComet3:
+				return "RAD-Comet 3";
 			case DONT_REUSE0:
 			case DONT_REUSE1:
 			case DONT_REUSE2:
@@ -239,6 +242,7 @@ private:
 #define ICSNEO_DEVICETYPE_RADMoon3 ((devicetype_t)0x00000023)
 #define ICSNEO_DEVICETYPE_RADCOMET ((devicetype_t)0x00000024)
 #define ICSNEO_DEVICETYPE_FIRE3FLEXRAY ((devicetype_t)0x00000025)
+#define ICSNEO_DEVICETYPE_RADCOMET3 ((devicetype_t)0x00000027)
 #define ICSNEO_DEVICETYPE_RED ((devicetype_t)0x00000040)
 #define ICSNEO_DEVICETYPE_ECU ((devicetype_t)0x00000080)
 #define ICSNEO_DEVICETYPE_IEVB ((devicetype_t)0x00000100)

include/icsneo/device/idevicesettings.h

@@ -327,6 +327,35 @@ typedef struct SERDESPOC_SETTINGS_t
 } SERDESPOC_SETTINGS;
 #define SERDESPOC_SETTINGS_SIZE 10
 
+enum
+{
+	SERDESGEN_MOD_ID_NONE = 0,
+	SERDESGEN_MOD_ID_FPD3_2x2 = 1,
+	SERDESGEN_MOD_ID_GMSL2_2x2 = 2,
+	SERDESGEN_MOD_ID_GMSL1_4x4 = 3,
+	SERDESGEN_MOD_ID_FPD3_TO_GMSL2_2x2 = 4,
+	// new modules go above this line
+	SERDESGEN_MOD_ID_UNKNOWN = -1,
+};
+
+#define SERDESGEN_SETTINGS_FLAG_TX_PATGEN_ENABLE 0x0001
+
+typedef struct SERDESGEN_SETTINGS_t
+{
+	/* 
+	 * bit0: enable pattern generator
+	 */
+	uint16_t flags;
+	uint8_t rsvd1;
+	uint8_t mod_id; // connected module passed back from device
+	uint16_t tx_speed; // Mbps per lane, all tx ports
+	uint16_t rx_speed; // Mbps per lane, all rx ports
+	// reserved space for the future
+	// maybe pattern generator settings
+	uint8_t rsvd2[24];
+} SERDESGEN_SETTINGS;
+#define SERDESGEN_SETTINGS_SIZE 32
+
 #define ETHERNET_SETTINGS2_FLAG_FULL_DUPLEX  0x01
 #define ETHERNET_SETTINGS2_FLAG_AUTO_NEG     0x02
 #define ETHERNET_SETTINGS2_FLAG_TCPIP_ENABLE 0x04

include/icsneo/device/tree/etherbadge/etherbadge.h

@@ -26,6 +26,8 @@ public:
 		return supportedNetworks;
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	EtherBADGE(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<EtherBADGESettings>(makeDriver);

include/icsneo/device/tree/neovifire2/neovifire2.h

@@ -87,6 +87,8 @@ public:
 		};
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	NeoVIFIRE2(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<NeoVIFIRE2Settings, Disk::NeoMemoryDiskDriver, Disk::NeoMemoryDiskDriver>(makeDriver);
@@ -99,7 +101,7 @@ protected:
 		}
 	}
 
-	bool currentDriverSupportsDFU() const override { return com->driver->isEthernet(); }
+	bool currentDriverSupportsDFU() const override { return !com->driver->isEthernet(); }
 
 	void setupPacketizer(Packetizer& packetizer) override {
 		Device::setupPacketizer(packetizer);

include/icsneo/device/tree/neovifire3/neovifire3.h

@@ -50,6 +50,8 @@ public:
 		return supportedNetworks;
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	NeoVIFIRE3(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<NeoVIFIRE3Settings, Disk::ExtExtractorDiskReadDriver, Disk::NeoMemoryDiskDriver>(makeDriver);

include/icsneo/device/tree/neovifire3flexray/neovifire3flexray.h

@@ -52,6 +52,8 @@ public:
 		return supportedNetworks;
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	NeoVIFIRE3FlexRay(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<NeoVIFIRE3FlexRaySettings, Disk::ExtExtractorDiskReadDriver, Disk::NeoMemoryDiskDriver>(makeDriver);

include/icsneo/device/tree/neovired2/neovired2.h

@@ -35,6 +35,8 @@ public:
 		return supportedNetworks;
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	NeoVIRED2(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<NeoVIRED2Settings, Disk::ExtExtractorDiskReadDriver, Disk::NeoMemoryDiskDriver>(makeDriver);

include/icsneo/device/tree/plasion/neoviion.h

@@ -15,6 +15,8 @@ public:
 	// USB PID is 0x0901, standard driver is FTDI
 	ICSNEO_FINDABLE_DEVICE_BY_PID(NeoVIION, DeviceType::ION, 0x0901);
 
+	bool supportsComponentVersions() const override { return true; }
+
 private:
 	NeoVIION(neodevice_t neodevice, const driver_factory_t& makeDriver) : Plasion(neodevice) {
 		initialize<NullSettings, Disk::PlasionDiskReadDriver, Disk::NeoMemoryDiskDriver>(makeDriver);

include/icsneo/device/tree/radcomet/radcometsettings.h

@@ -10,6 +10,11 @@ namespace icsneo {
 
 #endif
 
+#ifdef _MSC_VER
+#pragma warning(push)
+#pragma warning(disable : 4201) // nameless struct/union
+#endif
+
 #pragma pack(push, 2)
 typedef struct {
 	// ECU ID used in CAN communications.
@@ -32,7 +37,17 @@ typedef struct {
 	ISO9141_KEYWORD2000_SETTINGS iso9141_kwp_settings_1;
 	uint16_t iso_parity_1;
 	uint16_t iso_msg_termination_1;
-	uint64_t network_enables;
+	union
+	{
+		uint64_t word;
+		struct
+		{
+			uint16_t network_enables;
+			uint16_t network_enables_2;
+			uint16_t network_enables_3;
+			uint16_t network_enables_4;
+		};
+	} network_enables;
 	uint64_t termination_enables;
 	TIMESYNC_ICSHARDWARE_SETTINGS timeSyncSettings;
 	RAD_REPORTING_SETTINGS reporting;
@@ -59,8 +74,14 @@ typedef struct {
 } radcomet_settings_t;
 #pragma pack(pop)
 
+#ifdef _MSC_VER
+#pragma warning(pop)
+#endif
+
 #ifdef __cplusplus
 
+static_assert(sizeof(radcomet_settings_t) == 466, "RADComet settings size mismatch");
+
 #include <iostream>
 
 class RADCometSettings : public IDeviceSettings {

include/icsneo/device/tree/radcomet3/radcomet3.h

@@ -0,0 +1,87 @@
+#ifndef __RADCOMET3_H_
+#define __RADCOMET3_H_
+
+#ifdef __cplusplus
+
+#include "icsneo/device/tree/radcomet3/radcomet3.h"
+#include "icsneo/device/tree/radcomet3/radcomet3settings.h"
+
+namespace icsneo {
+
+class RADComet3 : public Device {
+public:
+
+	// Serial numbers start with C3
+	// USB PID is 0x1208, standard driver is FTDI3
+	// Ethernet MAC allocation is 0x20, standard driver is Raw
+	ICSNEO_FINDABLE_DEVICE(RADComet3, DeviceType::RADComet3, "C3");
+
+	static const std::vector<Network>& GetSupportedNetworks() {
+		static std::vector<Network> supportedNetworks = {
+			Network::NetID::HSCAN,
+			Network::NetID::HSCAN2,
+
+			Network::NetID::Ethernet,
+
+			Network::NetID::OP_Ethernet1,
+			Network::NetID::OP_Ethernet2,
+			Network::NetID::OP_Ethernet3,
+			Network::NetID::OP_Ethernet4,
+			Network::NetID::OP_Ethernet5,
+			Network::NetID::OP_Ethernet6,
+			Network::NetID::OP_Ethernet7,
+
+			Network::NetID::LIN,
+			Network::NetID::ISO9141,
+
+			Network::NetID::MDIO1,
+			Network::NetID::MDIO2,
+		};
+		return supportedNetworks;
+	}
+
+	size_t getEthernetActivationLineCount() const override { return 1; }
+
+	bool getEthPhyRegControlSupported() const override { return true; }
+
+protected:
+	RADComet3(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
+		initialize<RADComet3Settings>(makeDriver);
+	}
+
+	void setupPacketizer(Packetizer& packetizer) override {
+		Device::setupPacketizer(packetizer);
+		packetizer.disableChecksum = true;
+		packetizer.align16bit = false;
+	}
+
+	void setupEncoder(Encoder& encoder) override {
+		Device::setupEncoder(encoder);
+		encoder.supportCANFD = true;		
+		encoder.supportEthPhy = true;
+	}
+
+	void setupDecoder(Decoder& decoder) override {
+		Device::setupDecoder(decoder);
+		decoder.timestampResolution = 10; // Timestamps are in 10ns increments instead of the usual 25ns
+	}
+
+	void setupSupportedRXNetworks(std::vector<Network>& rxNetworks) override {
+		for(auto& netid : GetSupportedNetworks())
+			rxNetworks.emplace_back(netid);
+	}
+
+	// The supported TX networks are the same as the supported RX networks for this device
+	void setupSupportedTXNetworks(std::vector<Network>& txNetworks) override { setupSupportedRXNetworks(txNetworks); }
+
+	std::optional<MemoryAddress> getCoreminiStartAddressFlash() const override {
+		return 32*1024*1024;
+	}
+
+};
+
+}
+
+#endif // __cplusplus
+
+#endif

include/icsneo/device/tree/radcomet3/radcomet3settings.h

@@ -0,0 +1,113 @@
+#ifndef __RADCOMET3SETTINGS_H_
+#define __RADCOMET3SETTINGS_H_
+
+#include <stdint.h>
+#include "icsneo/device/idevicesettings.h"
+
+#ifdef __cplusplus
+
+namespace icsneo {
+
+#endif
+
+#pragma pack(push, 2)
+typedef struct {
+	// ECU ID used in CAN communications.
+	// TX ID = ECU ID with bit28 cleared,
+	// RX ID = ECUID with bit28 set,
+	// ECU ID = 0 implies ECU ID = serial no with bit 27 set
+	uint32_t ecu_id;
+	uint16_t perf_en;
+	struct
+	{
+		uint16_t hwComLatencyTestEn : 1;
+		uint16_t disableUsbCheckOnBoot : 1;
+		uint16_t reserved : 14;
+	} flags;
+	uint16_t network_enabled_on_boot;
+	CAN_SETTINGS can1;
+	CANFD_SETTINGS canfd1;
+	CAN_SETTINGS can2;
+	CANFD_SETTINGS canfd2;
+	ISO9141_KEYWORD2000_SETTINGS iso9141_kwp_settings_1;
+	uint16_t iso_parity_1;
+	uint16_t iso_msg_termination_1;
+	uint64_t network_enables;
+	uint64_t network_enables_2;
+	uint64_t termination_enables;
+	TIMESYNC_ICSHARDWARE_SETTINGS timeSyncSettings;
+	RAD_REPORTING_SETTINGS reporting;
+	int16_t iso15765_separation_time_offset;
+	uint32_t pwr_man_timeout;
+	uint16_t pwr_man_enable;
+	RAD_GPTP_SETTINGS gPTP;
+	STextAPISettings text_api;
+	// Ethernet 10/100/1000
+	ETHERNET_SETTINGS2 ethernet;
+	// Ethernet General
+	OP_ETH_GENERAL_SETTINGS opEthGen;
+	// 100/1000T1
+	ETHERNET_SETTINGS2 ethT1;
+	OP_ETH_SETTINGS opEth1;
+	// 10T1S
+	ETHERNET_SETTINGS2 ethT1s1;
+	ETHERNET10T1S_SETTINGS t1s1;
+	// 10T1S
+	ETHERNET_SETTINGS2 ethT1s2;
+	ETHERNET10T1S_SETTINGS t1s2;
+	// 10T1S
+	ETHERNET_SETTINGS2 ethT1s3;
+	ETHERNET10T1S_SETTINGS t1s3;
+	// 10T1S
+	ETHERNET_SETTINGS2 ethT1s4;
+	ETHERNET10T1S_SETTINGS t1s4;
+	// 10T1S
+	ETHERNET_SETTINGS2 ethT1s5;
+	ETHERNET10T1S_SETTINGS t1s5;
+	// 10T1S
+	ETHERNET_SETTINGS2 ethT1s6;
+	ETHERNET10T1S_SETTINGS t1s6;
+	LIN_SETTINGS lin1;
+} radcomet3_settings_t;
+#pragma pack(pop)
+
+#ifdef __cplusplus
+
+#include <iostream>
+
+class RADComet3Settings : public IDeviceSettings {
+public:
+	RADComet3Settings(std::shared_ptr<Communication> com) : IDeviceSettings(com, sizeof(radcomet3_settings_t)) {}
+	const CAN_SETTINGS* getCANSettingsFor(Network net) const override {
+		auto cfg = getStructurePointer<radcomet3_settings_t>();
+		if(cfg == nullptr)
+			return nullptr;
+		switch(net.getNetID()) {
+			case Network::NetID::HSCAN:
+				return &(cfg->can1);
+			case Network::NetID::HSCAN2:
+				return &(cfg->can2);
+			default:
+				return nullptr;
+		}
+	}
+	const CANFD_SETTINGS* getCANFDSettingsFor(Network net) const override {
+		auto cfg = getStructurePointer<radcomet3_settings_t>();
+		if(cfg == nullptr)
+			return nullptr;
+		switch(net.getNetID()) {
+			case Network::NetID::HSCAN:
+				return &(cfg->canfd1);
+			case Network::NetID::HSCAN2:
+				return &(cfg->canfd2);
+			default:
+				return nullptr;
+		}
+	}
+};
+
+}
+
+#endif // __cplusplus
+
+#endif

include/icsneo/device/tree/radepsilon/radepsilon.h

@@ -24,6 +24,8 @@ public:
 		return supportedNetworks;
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	RADEpsilon(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize(makeDriver);

include/icsneo/device/tree/radgigastar/radgigastarsettings.h

@@ -60,16 +60,17 @@ typedef struct {
 	struct
 	{
 		uint16_t hwComLatencyTestEn : 1;
-		uint16_t reserved : 15;
+		uint16_t disableUsbCheckOnBoot : 1;
+		uint16_t reserved : 14;
 	} flags;
 	ETHERNET_SETTINGS2 ethernet1;
 	ETHERNET_SETTINGS2 ethernet2;
 
 	LIN_SETTINGS lin1;
 
-    OP_ETH_GENERAL_SETTINGS opEthGen;
-    OP_ETH_SETTINGS opEth1;
-    OP_ETH_SETTINGS opEth2;
+	OP_ETH_GENERAL_SETTINGS opEthGen;
+	OP_ETH_SETTINGS opEth1;
+	OP_ETH_SETTINGS opEth2;
 
 	SERDESCAM_SETTINGS serdescam1;
 	SERDESPOC_SETTINGS serdespoc;
@@ -79,12 +80,16 @@ typedef struct {
 	SERDESCAM_SETTINGS serdescam4;
 	RAD_REPORTING_SETTINGS reporting;
 	uint16_t network_enables_4;
+	SERDESGEN_SETTINGS serdesgen;
+
+	RAD_GPTP_SETTINGS gPTP;
+	uint64_t network_enables_5;
 } radgigastar_settings_t;
 #pragma pack(pop)
 
 #ifdef __cplusplus
 
-static_assert(sizeof(radgigastar_settings_t) == 634, "RADGigastar settings size mismatch");
+static_assert(sizeof(radgigastar_settings_t) == 710, "RADGigastar settings size mismatch");
 
 #include <iostream>
 

include/icsneo/device/tree/radjupiter/radjupiter.h

@@ -29,6 +29,8 @@ public:
 
 	bool getEthPhyRegControlSupported() const override { return true; }
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	RADJupiter(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<RADJupiterSettings>(makeDriver);

include/icsneo/device/tree/radmoon2/radmoon2zl.h

@@ -16,6 +16,8 @@ public:
 
 	uint8_t getPhyAddrOrPort() const override { return 1; }
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	RADMoon2ZL(neodevice_t neodevice, const driver_factory_t& makeDriver) : RADMoon2Base(neodevice) {
 		initialize<RADMoon2Settings>(makeDriver);

include/icsneo/device/tree/radmoon3/radmoon3.h

@@ -27,6 +27,8 @@ public:
 
 	bool isOnlineSupported() const override { return false; }
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	RADMoon3(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<RADMoon3Settings>(makeDriver);

include/icsneo/device/tree/radmoonduo/radmoonduo.h

@@ -25,6 +25,8 @@ public:
 
 	bool getEthPhyRegControlSupported() const override { return true; }
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	RADMoonDuo(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<RADMoonDuoSettings>(makeDriver);

include/icsneo/device/tree/radpluto/radpluto.h

@@ -34,6 +34,8 @@ public:
 
 	bool getEthPhyRegControlSupported() const override { return true; }
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	RADPluto(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<RADPlutoSettings>(makeDriver);

include/icsneo/device/tree/valuecan3/valuecan3.h

@@ -22,6 +22,8 @@ public:
 		return supportedNetworks;
 	}
 
+	bool supportsComponentVersions() const override { return true; }
+
 private:
 	ValueCAN3(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<ValueCAN3Settings>(makeDriver);

include/icsneo/device/tree/valuecan4/valuecan4-2el.h

@@ -83,7 +83,7 @@ protected:
 		ethActivationStatus = status->ethernetActivationLineEnabled;
 	}
 
-	bool currentDriverSupportsDFU() const override { return com->driver->isEthernet(); }
+	bool currentDriverSupportsDFU() const override { return !com->driver->isEthernet(); }
 
 	void setupPacketizer(Packetizer& packetizer) override {
 		ValueCAN4::setupPacketizer(packetizer);

include/icsneo/device/tree/valuecan4/valuecan4.h

@@ -12,6 +12,8 @@ class ValueCAN4 : public Device {
 public:
 	// All ValueCAN 4 devices share a USB PID of 0x1101
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	using Device::Device;
 

include/icsneo/device/tree/valuecan4/valuecan4industrial.h

@@ -40,8 +40,6 @@ protected:
 	// The supported TX networks are the same as the supported RX networks for this device
 	void setupSupportedTXNetworks(std::vector<Network>& txNetworks) override { setupSupportedRXNetworks(txNetworks); }
 
-	bool currentDriverSupportsDFU() const override { return com->driver->isEthernet(); }
-
 	void setupPacketizer(Packetizer& packetizer) override {
 		ValueCAN4::setupPacketizer(packetizer);
 		packetizer.align16bit = !com->driver->isEthernet();

include/icsneo/device/tree/vividcan/vividcan.h

@@ -29,6 +29,8 @@ public:
 
 	bool isOnlineSupported() const override { return false; }
 
+	bool supportsComponentVersions() const override { return true; }
+
 protected:
 	VividCAN(neodevice_t neodevice, const driver_factory_t& makeDriver) : Device(neodevice) {
 		initialize<VividCANSettings>(makeDriver);

include/icsneo/platform/posix/devices.h

@@ -14,6 +14,7 @@
 #include "icsneo/device/tree/rada2b/rada2b.h"
 #include "icsneo/device/tree/radcomet/radcomet.h"
 #include "icsneo/device/tree/radcomet/radcomet2.h"
+#include "icsneo/device/tree/radcomet3/radcomet3.h"
 #include "icsneo/device/tree/radepsilon/radepsilon.h"
 #include "icsneo/device/tree/radgalaxy/radgalaxy.h"
 #include "icsneo/device/tree/radgigastar/radgigastar.h"

include/icsneo/platform/windows/devices.h

@@ -14,6 +14,7 @@
 #include "icsneo/device/tree/rada2b/rada2b.h"
 #include "icsneo/device/tree/radcomet/radcomet.h"
 #include "icsneo/device/tree/radcomet/radcomet2.h"
+#include "icsneo/device/tree/radcomet3/radcomet3.h"
 #include "icsneo/device/tree/radepsilon/radepsilon.h"
 #include "icsneo/device/tree/radgalaxy/radgalaxy.h"
 #include "icsneo/device/tree/radgigastar/radgigastar.h"