a460e27657
Add RADGigalog for Windows
...
Ethernet communication with device only
2020-09-08 17:55:52 -04:00
8e999a0fb8
Heartbeat: Break from loop rather than returning
...
This makes sure we run the cleanup code at the bottom of the thread
2020-09-01 16:32:54 -04:00
046e2bae9d
Ensure proper closure of the heartbeat thread on reopen
2020-09-01 15:52:41 -04:00
044c2bb86f
Detect device disconnects
...
When a device is sending any traffic, the device is considered to be connected. If no traffic if being received from the device, a status is requested. If the device fails to report the status back in a timely manner, it is considered to be disconnected.
If the device fails to reply to the status request, it is important to confirm that the device is not applying settings. While the device is applying settings, it will not be sending heartbeats or able to process a status request.
2020-08-27 13:20:48 -04:00
3e4b595fe4
Resolve signedness warnings on GCC
2020-08-18 15:37:05 -04:00
afda617894
Remove trailing white-space
2020-08-11 13:42:13 -04:00
dcc44d99ea
Fix an issue where the FIRE could not be opened
2020-06-17 15:11:57 -04:00
d2019c24df
reuse discovered pcap interfaces in DeviceFinder::FindAll()
2020-05-11 16:17:56 -04:00
d8798acaa7
Communication: MultiChannel: Properly mask out communication from non-main VNETs
...
This also makes it possible for Communication to create more instances of Packetizer
This is necessary because Packetizer is not thread safe,
so when we support more VNETs we will need to create more Packetizers.
2020-03-09 13:56:18 -04:00
9ac3fd56bd
FlexRay: Don't check for POCReady when writing configuration
...
It is not needed and this gives a good speedup to configuration
2020-02-28 20:10:31 -05:00
8ae3317930
FlexRay: Rework controller register reading for reliability
2020-02-28 20:09:33 -05:00
1cd817a16b
Fix race conditions with Communication::waitForMessageSync
2020-02-28 20:00:08 -05:00
9fcba2eb13
Notify extensions we're going offline before we actually do
2020-02-28 19:57:43 -05:00
0c330f734b
Fix typo
2020-02-28 19:57:16 -05:00
a2fecb7621
Support for EtherBADGE
2020-02-20 14:43:10 -05:00
724cc428d9
Properly specify the FlexRay CC registers
2019-11-20 16:24:20 +01:00
52b0b4c586
Properly set up transmit buffers
2019-11-19 17:07:48 +01:00
4821a957dd
Properly decode incoming FlexRayPackets
2019-11-18 06:09:25 +01:00
37778d7891
Implement FlexRay transmit, configuration, and cold start
2019-11-12 20:38:47 -05:00
2f9844df92
Begin work on FlexRay support
2019-10-16 16:43:31 -04:00
0607986114
Resolve merge conflicts
2019-08-12 11:17:28 -04:00
ef16e60025
Added more mutexes in eventmanager, fixed exiting destruction bug
2019-08-07 13:12:16 -04:00
9629864f1b
Fixed wait check in device online/offline
2019-08-07 10:06:33 -04:00
781b23c0e7
std::chrono::seconds::duration should just be std::chrono::seconds
2019-08-06 17:35:44 -04:00
3358241abe
Reordered error downgrading, order of going offline, and renamed locks
2019-08-06 10:32:19 -04:00
71176137ca
Added waits to ensure going online and offline succeed before returning
2019-08-05 15:35:44 -04:00
8c186f00cd
Added functionality to set blocking behavior of write
2019-07-24 14:57:06 -04:00
69b7e5b45a
Device::GetMessages now returns a pair of {vector, bool} instead of vector
2019-07-24 13:40:54 -04:00
50dba62a89
Event refactor builds on Windows
2019-06-24 17:59:45 -04:00
92368f70a5
Added error checking for polling
2019-06-18 11:38:12 -04:00
2b34c82382
Added error checking to Device::getMessages()
2019-06-18 10:34:50 -04:00
04a2402925
Added additional documentation
2019-06-14 17:44:01 -04:00
a4a42c8704
Reworked updating LEDState to use sendCommand() instead of transmit()
2019-06-14 16:09:19 -04:00
28fc98c475
Added icsneo_isMessagePollingEnabled(), removed polling check from transmitting, and disabled error reporting on device destruction
2019-06-14 15:13:22 -04:00
b7288edd9a
Finished adding error checking
2019-06-13 16:01:35 -04:00
8a6073a9cf
Transmit and receiving messages now fails properly when the device is closed. Device closes when serial number initialization fails after open.
2019-06-13 16:01:35 -04:00
519e64fb17
Added error checking to functions called from Communication
2019-06-13 16:01:35 -04:00
a16f2843d8
Added error reporting to idevicesettings
2019-06-13 16:01:35 -04:00
965679c370
Added error checking and removed some redundancy from device isOpen()
2019-06-13 16:01:35 -04:00
903615dadd
Added icsneo_isOpen() functionality
2019-06-13 16:01:35 -04:00
56d191b438
Add support for RADPluto over USB
2019-05-14 15:29:03 -04:00
288ff3565e
Make sure to close underlying com if we fail to open
2019-05-14 15:20:04 -04:00
7cf0ec5f4f
Rename timestampMultiplier to timestampResolution
...
We've also decided to leave it out of the message structures since, for most uses going forward, it will not be needed.
Anyone who wants the timestamp resolution can always make the inexpensive device call to get it.
2019-05-06 12:32:04 -04:00
23c3cc3763
Implemented legacy icsneoGetTimeStampForMsg() function call.
...
Signed-off-by: David Rebbe <drebbe@intrepidcs.com>
2019-04-05 19:09:52 -04:00
ae78122cbe
Add LSFTCAN and SWCAN support
2019-01-22 13:14:28 -05:00
7e9fbc4959
Basic introspection for device supported networks
2019-01-03 17:00:15 -05:00
603d532d2d
Add support for RADStar2 settings
2018-12-21 20:28:25 -05:00
e124ad28f4
Major improvements to the settings API
...
* Allow the raw structure to be manipulated from C and Legacy APIs
* Structure is now split between what's on the device and what's on the client so changes will not be visible from read methods until apply()
* Allow devices to connect which have slightly different firmware versions than the settings structure
2018-12-21 20:24:11 -05:00
3488e36f2a
Added the ability to get the baudrate for networks
2018-12-10 14:57:43 -05:00
8a4e33c8df
Allow version and supported devices to be printed at runtime
2018-11-20 10:41:42 -05:00
Paul Hollinsky
Kyle Schwarz
Jeffrey Quesnelle
Paul Hollinsky
EricLiu2000
David Rebbe