Merge 63500f8dd0 into 374fecde09

The mixed mode is able to automatically detect the potential supported
CAN frame types CAN CC/FD/XL by checking the CAN device MTU at startup.

Usually the MTU shows which CAN frame types can be sent but in the case of
CAN XL in CANXL-only mode CC and FD frames can not be sent on the CAN_RAW
socket.

Since this patch [1] the CAN_RAW socket rejects unsupported CAN frames and
returns -EINVAL as error code. With this change in cangen the CC and FD
frame generation can be disabled in mixed mode at runtime.

[1] https://lore.kernel.org/linux-can/20251125123859.3924-17-socketcan@hartkopp.net/T/#u

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>

candump.c

@@ -113,7 +113,8 @@ static const int canfx_on = 1;
 
 #define MAXANI 4
 static const char anichar[MAXANI] = { '|', '/', '-', '\\' };
-static const char extra_m_info[4][4] = { "- -", "B -", "- E", "B E" };
+static const char extra_fd_info[4][4] = { "- -", "B -", "- E", "B E" };
+static const char extra_xl_info[4][4] = { "- -", "S -", "- R", "S R" };
 
 extern int optind, opterr, optopt;
 
@@ -143,7 +144,7 @@ static void print_usage(void)
 	fprintf(stderr, "         -d          (monitor dropped CAN frames)\n");
 	fprintf(stderr, "         -e          (dump CAN error frames in human-readable format)\n");
 	fprintf(stderr, "         -8          (display raw DLC values in {} for Classical CAN)\n");
-	fprintf(stderr, "         -x          (print extra message infos, rx/tx brs esi)\n");
+	fprintf(stderr, "         -x          (print extra message infos, rx/tx [brs esi|sec rrs])\n");
 	fprintf(stderr, "         -T <msecs>  (terminate after <msecs> if no frames were received)\n");
 	fprintf(stderr, "\n");
 	fprintf(stderr, "Up to %d CAN interfaces with optional filter sets can be specified\n", MAXSOCK);
@@ -892,11 +893,16 @@ int main(int argc, char **argv)
 
 			if (extra_msg_info) {
 				if (msg.msg_flags & MSG_DONTROUTE)
-					alen += sprintf(afrbuf + alen, "  TX %s",
+					alen += sprintf(afrbuf + alen, "  TX");
-							  extra_m_info[cu.fd.flags & 3]);
 				else
-					alen += sprintf(afrbuf + alen, "  RX %s",
+					alen += sprintf(afrbuf + alen, "  RX");
-							  extra_m_info[cu.fd.flags & 3]);
+
+				if (cu.xl.flags & CANXL_XLF)
+					alen += sprintf(afrbuf + alen, " %s",
+							extra_xl_info[cu.xl.flags & 3]);
+				else
+					alen += sprintf(afrbuf + alen, " %s",
+							extra_fd_info[cu.fd.flags & 3]);
 			}
 
 			alen += sprintf(afrbuf + alen, "%s  ", (color == 1) ? col_off : "");

cangen.c

@@ -180,7 +180,7 @@ static void print_usage(char *prg)
 	fprintf(stderr, "         -X            (generate CAN XL CAN frames)\n");
 	fprintf(stderr, "         -R            (generate RTR frames)\n");
 	fprintf(stderr, "         -8            (allow DLC values greater then 8 for Classic CAN frames)\n");
-	fprintf(stderr, "         -m            (mix -e -f -b -E -R -X frames)\n");
+	fprintf(stderr, "         -m            (mix CC [-e -R] FD [-f -b -E] XL [-X] on capable devices)\n");
 	fprintf(stderr, "         -I <mode>     (CAN ID generation mode - see below)\n");
 	fprintf(stderr, "         -L <mode>     (CAN data length code (dlc) generation mode - see below)\n");
 	fprintf(stderr, "         -D <mode>     (CAN data (payload) generation mode - see below)\n");
@@ -339,10 +339,9 @@ resend:
 	nbytes = sendmsg(fd, &msg, 0);
 	if (nbytes < 0) {
 		ret = -errno;
-		if (ret != -ENOBUFS) {
+		if (ret != -ENOBUFS)
-			perror("write");
 			return ret;
-		}
+
 		if (!ignore_enobufs && !timeout) {
 			perror("write");
 			return ret;
@@ -455,6 +454,9 @@ int main(int argc, char **argv)
 	unsigned char extended = 0;
 	unsigned char canfd = 0;
 	unsigned char canxl = 0;
+	unsigned char mixcc = 1; /* mix default */
+	unsigned char mixfd = 1; /* mix default */
+	unsigned char mixxl = 1; /* mix default */
 	unsigned char brs = 0;
 	unsigned char esi = 0;
 	unsigned char mix = 0;
@@ -574,7 +576,6 @@ int main(int argc, char **argv)
 
 		case 'm':
 			mix = 1;
-			canfd = 1; /* to switch the socket into CAN FD mode */
 			view |= CANLIB_VIEW_INDENT_SFF;
 			break;
 
@@ -777,14 +778,58 @@ int main(int argc, char **argv)
 			   &loopback, sizeof(loopback));
 	}
 
-	if (canfd || canxl) {
+	/* get CAN netdevice MTU for frame type capabilities */
+	if (ioctl(s, SIOCGIFMTU, &ifr) < 0) {
+		perror("SIOCGIFMTU");
+		return 1;
+	}
 
-		/* check if the frame fits into the CAN netdevice */
+	/* check CAN XL support */
-		if (ioctl(s, SIOCGIFMTU, &ifr) < 0) {
+	if (ifr.ifr_mtu < (int)CANXL_MIN_MTU) {
-			perror("SIOCGIFMTU");
+		mixxl = 0;
+		if (canxl) {
+			printf("CAN interface not CAN XL capable - sorry.\n");
 			return 1;
 		}
+	}
 
+	/* check CAN FD support */
+	if (ifr.ifr_mtu < (int)CANFD_MTU) {
+		mixfd = 0;
+		if (canfd) {
+			printf("CAN interface not CAN FD capable - sorry.\n");
+			return 1;
+		}
+	}
+
+	/* enable CAN FD on the socket */
+	if (mixfd) {
+		/* interface is ok - try to switch the socket into CAN FD mode */
+		if (setsockopt(s, SOL_CAN_RAW, CAN_RAW_FD_FRAMES,
+			       &enable_canfx, sizeof(enable_canfx))){
+			printf("error when enabling CAN FD support\n");
+			return 1;
+		}
+	}
+
+	/* enable CAN XL on the socket */
+	if (mixxl) {
+		/* interface is ok - try to switch the socket into CAN XL mode */
+		if (setsockopt(s, SOL_CAN_RAW, CAN_RAW_XL_FRAMES,
+			       &enable_canfx, sizeof(enable_canfx))){
+			printf("error when enabling CAN XL support\n");
+			return 1;
+		}
+		/* try to enable the CAN XL VCID pass through mode */
+		if (setsockopt(s, SOL_CAN_RAW, CAN_RAW_XL_VCID_OPTS,
+			       &vcid_opts, sizeof(vcid_opts))) {
+			printf("error when enabling CAN XL VCID pass through\n");
+			return 1;
+		}
+	}
+
+	/* sanitize given values */
+	if (canfd || canxl) {
 		if (canfd) {
 			/* ensure discrete CAN FD length values 0..8, 12, 16, 20, 24, 32, 64 */
 			cu.fd.len = can_fd_dlc2len(can_fd_len2dlc(cu.fd.len));
@@ -793,41 +838,6 @@ int main(int argc, char **argv)
 			if (cu.fd.len > CANFD_MAX_DLEN)
 				cu.fd.len = CANFD_MAX_DLEN;
 		}
-
-		if (canxl && (ifr.ifr_mtu < (int)CANXL_MIN_MTU)) {
-			printf("CAN interface not CAN XL capable - sorry.\n");
-			return 1;
-		}
-
-		if (canfd && (ifr.ifr_mtu < (int)CANFD_MTU)) {
-			printf("CAN interface not CAN FD capable - sorry.\n");
-			return 1;
-		}
-
-		if (ifr.ifr_mtu == (int)CANFD_MTU) {
-			/* interface is ok - try to switch the socket into CAN FD mode */
-			if (setsockopt(s, SOL_CAN_RAW, CAN_RAW_FD_FRAMES,
-				       &enable_canfx, sizeof(enable_canfx))){
-				printf("error when enabling CAN FD support\n");
-				return 1;
-			}
-		}
-
-		if (ifr.ifr_mtu >= (int)CANXL_MIN_MTU) {
-			/* interface is ok - try to switch the socket into CAN XL mode */
-			if (setsockopt(s, SOL_CAN_RAW, CAN_RAW_XL_FRAMES,
-				       &enable_canfx, sizeof(enable_canfx))){
-				printf("error when enabling CAN XL support\n");
-				return 1;
-			}
-			/* try to enable the CAN XL VCID pass through mode */
-			if (setsockopt(s, SOL_CAN_RAW, CAN_RAW_XL_VCID_OPTS,
-				       &vcid_opts, sizeof(vcid_opts))) {
-				printf("error when enabling CAN XL VCID pass through\n");
-				return 1;
-			}
-		}
-
 	} else {
 		/* sanitize Classical CAN 2.0 frame length */
 		if (len8_dlc) {
@@ -1040,8 +1050,31 @@ int main(int argc, char **argv)
 		}
 
 		ret = do_send_one(s, &cu, mtu, polltimeout);
-		if (ret)
+		if ((ret == -EINVAL) && mix) {
+			/* mix mode: disable unsupported CAN frame type */
+			switch (mtu) {
+			case CAN_MTU:
+				mixcc = 0;
+				break;
+			case CANFD_MTU:
+				mixfd = 0;
+				break;
+			case CANXL_MTU:
+				mixxl = 0;
+				break;
+			default:
+				printf ("mix mode: unknown MTU");
+				return 1;
+			}
+			if (!mixcc && !mixfd && !mixxl) {
+				printf ("mix mode: no valid CAN frame types\n");
+				return 1;
+			}
+		} else if (ret) {
+			/* other error than -ENOBUFS and -EINVAL */
+			perror("write");
 			return 1;
+		}
 
 		if (burst_sent_count >= burst_count)
 			burst_sent_count = 0;
@@ -1082,18 +1115,41 @@ int main(int argc, char **argv)
 		}
 
 		if (mix) {
+			canfd = 0;
+			canxl = 0;
 			i = random();
 			extended = i & 1;
-			canfd = i & 2;
+			if (mixfd) {
-			if (canfd) {
+				canfd = i & 2;
-				brs = i & 4;
+				if (canfd) {
-				esi = i & 8;
+					brs = i & 4;
+					esi = i & 8;
+				}
+			}
+			if (mixxl) {
+				if (mixfd)
+					canxl = ((i & 96) == 96); /* 1/4 */
+				else
+					canxl = ((i & 32) == 32); /* 1/2 */
+			}
+			if (mixcc) {
+				rtr_frame = ((i & 24) == 24); /* reduce RTR to 1/4 */
+			} else {
+				/* no CC frames allowed - CAN XL-only mode? */
+				if (!canxl && !canfd) {
+					/* force XL or FD frames */
+					if (mixxl)
+						canxl = 1;
+					else if (mixfd) {
+						canfd = 1;
+						brs = i & 4;
+						esi = i & 8;
+					} else {
+						printf ("mix mode: no valid CAN frame types\n");
+						return 1;
+					}
+				}
 			}
-			/* generate CAN XL traffic if the interface is capable */
-			if (ifr.ifr_mtu >= (int)CANXL_MIN_MTU)
-				canxl = ((i & 96) == 96);
-
-			rtr_frame = ((i & 24) == 24); /* reduce RTR frames to 1/4 */
 		}
 	}
 

canplayer-bisect

@@ -0,0 +1,205 @@
+#!/bin/bash
+
+if [ -z "${CANPLAYER}" ]; then
+	CANPLAYER="canplayer"
+fi
+
+die() {
+	echo "$*" > /dev/stderr
+	exit 1
+}
+
+usage() {
+	echo "canplayer-bisect <start|stop|clean|good|yes|bad|no|again|where|undo> <logfile> <canplayer options>"
+}
+
+is_ready() {
+	if [ ! -d .canplayer-bisect ]; then
+		usage
+		exit 1
+	fi
+
+	return 0
+}
+
+setup() {
+	is_ready
+
+	LOGFILE=$(cat .canplayer-bisect/logfile |head -n 1)
+
+	SAVED_LEN="$(cat .canplayer-bisect/len|tail -n 1)"
+	LEN="$(wc -l ${LOGFILE} | awk '{ print $1 }')"
+
+	if [ "$LEN" != "$SAVED_LEN" ]; then
+		die "logfile has changed size. restart"
+	fi
+
+	CANPLAYER_ARGS=$(cat .canplayer-bisect/args |head -n 1)
+
+	HEAD="$(cat .canplayer-bisect/head |tail -n 1)"
+	TAIL="$(cat .canplayer-bisect/tail |tail -n 1)"
+}
+
+back() {
+	HEAD="$(cat .canplayer-bisect/head |tail -n 2 |head -n1)"
+	TAIL="$(cat .canplayer-bisect/tail |tail -n 2 |head -n1)"
+}
+
+do_undo() {
+	sed -i '$ d' .canplayer-bisect/head
+	sed -i '$ d' .canplayer-bisect/tail
+}
+
+teardown() {
+	mkdir -p .canplayer-bisect
+	echo $LEN > .canplayer-bisect/len
+	echo $LOGFILE > .canplayer-bisect/logfile
+	echo $CANPLAYER_ARGS > .canplayer-bisect/args
+
+	echo $HEAD >> .canplayer-bisect/head
+	echo $TAIL >> .canplayer-bisect/tail
+}
+
+show() {
+	cat $LOGFILE | sed -n ${HEAD},${TAIL}p
+}
+
+play() {
+	#we *could* pipe directly to canplayer, but then the user can't add -l i to CANPLAYER_ARGS to hunt for packets using looped playback
+	the_show="$(mktemp)"
+	trap "rm -rf \"${the_show}\"" EXIT
+
+	show > "${the_show}"
+	"${CANPLAYER}" ${CANPLAYER_ARGS} -I "${the_show}"
+}
+
+do_show() {
+	setup
+
+	show
+}
+
+check_heads_n_tails() {
+	if [ $HEAD -eq $TAIL ]; then
+		do_stop
+	fi
+}
+
+do_good() {
+	setup
+
+	check_heads_n_tails
+
+	if [ $(( $HEAD + 1 )) -eq $TAIL ]; then
+		TAIL=$HEAD
+	else
+		TAIL=$(( ( $TAIL - $HEAD ) / 2 + $HEAD - 1 ))
+	fi
+
+	teardown
+	play
+}
+
+do_bad() {
+	setup
+
+	check_heads_n_tails
+
+	back
+	if [ $(( $HEAD + 1 )) -eq $TAIL ]; then
+		HEAD=$TAIL
+	else
+		HEAD=$(( ( $TAIL - $HEAD ) / 2 + $HEAD ))
+	fi
+
+	teardown
+	play
+}
+
+do_again() {
+	setup
+	play
+}
+
+do_start() {
+	do_clean
+
+	LEN="$(wc -l ${LOGFILE} | awk '{ print $1 }')"
+
+	HEAD=1
+	TAIL=$LEN
+
+	echo "assuming logfile contains the packets you seek... bisecting to first half"
+
+	teardown
+	play
+}
+
+do_where() {
+	setup
+	echo "between $HEAD and $TAIL (+$(( $TAIL - $HEAD ))) of $LOGFILE"
+}
+
+do_stop() {
+	setup
+
+	if [ "$COMMAND" == "no" ]; then
+		echo "failed to find what you were looking for"
+		exit 1
+	else
+		echo "the packets you seek are:"
+		do_where
+		exit 0
+	fi
+}
+
+do_clean() {
+	rm -rf .canplayer-bisect
+}
+
+if [ -z "$1" ]; then
+	usage
+	exit 1
+fi
+COMMAND=$1
+
+if [ ! -d .canplayer-bisect ] && [ ! -z "$2" ] && [ ! -e "$2" ]; then
+	usage
+	exit 1
+fi
+LOGFILE="$2"
+
+shift
+shift
+CANPLAYER_ARGS="$*"
+
+case "$COMMAND" in
+	start)
+		do_start
+	;;
+	stop)
+		do_stop
+	;;
+	clean)
+		do_clean
+	;;
+	good|yes)
+		do_good
+	;;
+	bad|no)
+		do_bad
+	;;
+	again)
+		do_again
+	;;
+	where)
+		do_where
+	;;
+	undo)
+		do_undo
+	;;
+	show)
+		do_show
+	;;
+esac
+

cansend.c

@@ -80,7 +80,10 @@ static void print_usage(char *prg)
 		"_{dlc}:\n"
 		" an optional 9..F data length code value when payload length is 8\n"
 		"<flags>:\n"
-		" a single ASCII Hex value (0 .. F) which defines canfd_frame.flags\n"
+		" a single ASCII Hex value (0 .. F) which defines canfd_frame.flags:\n"
+		" %x CANFD_BRS\n"
+		" %x CANFD_ESI\n"
+		" %x CANFD_FDF\n"
 		"\n"
 		"<vcid>:\n"
 		" 2 hex chars - virtual CAN network identifier (00 .. FF)\n"
@@ -100,7 +103,8 @@ static void print_usage(char *prg)
 		"  1F334455#1122334455667788_B / 123#R / 00000123#R3 / 333#R8_E /\n"
 		"  45123#81:00:12345678#11223344.556677 / 00242#81:07:40000123#112233\n"
 		"\n",
-		prg, prg);
+		prg, prg,
+		CANFD_BRS, CANFD_ESI, CANFD_FDF);
 }
 
 int main(int argc, char **argv)

lib.h

@@ -49,6 +49,8 @@
 #include <stddef.h>
 #include <stdio.h>
 
+#include <linux/can.h>
+
 #ifdef DEBUG
 #define pr_debug(fmt, args...) printf(fmt, ##args)
 #else