#### [Find Repositorys](https://git.intrepidcs.de/explore/repos)
# Demo RAD-Galaxy2
## General showcase
Short description what will be demonstrated
* VividCAN1: displaying Vehicle data (see: [Demo_Datalogger](https://git.intrepidcs.de/Andreas/Demo_Datalogger))
Slider to change background light -> this information will be send to second VividCAN2 to remotely change background light.
CAN -> CAN2ETH GW -> ETH tapping -> ETH2CAN GW
Push buttons to send TC10 commands to SFP modules of RAD-GigaStar
* Fire3/Red2: Simulating Vehicle data and having CAN-ETH embedded Gateway implemented
(part of [Demo_VCAN42-Ind_CAN-ETH-GW](https://git.intrepidcs.de/Andreas/Demo_VCAN42-Ind_CAN-ETH-GW))
* RAD-Galaxy2: Tap device - ETH1 <-> ETH2 / AE01 <-> AE02 streams
* RAD-GigaStar: AE simulation (saw signal) - RX on AE01, RX on AE02.
Gatewaying ETH1 to CAN1/2 -> Vehicle data displayed on VividCAN2
(using CAN-ETH-CAN (see [Demo_VCAN42-Ind_CAN-ETH-GW](https://git.intrepidcs.de/Andreas/Demo_VCAN42-Ind_CAN-ETH-GW))
* VividCAN2: Displaying same data as VividCAN1 but received ofer ethernet and ETH-CAN-GW
additionally Backlight can be adjusted over VividCAN1 slider
* VehicleSpy: connected to Fire3/Red2 to display Vehicle data + saw signal from RAD-GigaStar
* Wireshark (with ICSCAP): Monitoring the whole, tapped streams
## Requirements
* ["Remote" Datalogger](https://intrepidcs.com/products/data-loggers/)
(e.g. neoVI-RED2/Fire3/Connect) with CoreMini [Setup](RED2_Playback_and_Log_GW.vs3) and
replay files [File1]('full%20trace%202022-06-10%2006-54-10-290994%20Partition%200.vsb')
and [File2]('full%20trace%202022-06-10%2010-26-01-291045%20Partition%200.vsb')
* Two VividCAN with CoreMini [Setup]('VividCAN%20Demo.vs3')
* [RAD-Galaxy2](https://intrepidcs.com/products/automotive-ethernet-tools/rad-galaxy-2)
* RAD-GigaStar, RED2 or Fire3 with CoreMini [Setup](GigaStar_CAN-ETH-GW.vs3) (embedded CAN-ETH Gateway
## Setup I
### Showcase - Vehicle Spy
Individual description of setup
## Setup II
If multiple setups are available
### Showcase - Wireshark
Individual description of setup