diff --git a/ReadMe.md b/ReadMe.md index 6b0815f..f9b060e 100644 --- a/ReadMe.md +++ b/ReadMe.md @@ -1 +1 @@ -#### [Find Repositorys](https://git.intrepidcs.de/explore/repos) # Demo RAD-Galaxy2 ## General showcase Short description what will be demonstrated * VividCAN1:
Display Vehicle data (see: [Demo_Datalogger](https://git.intrepidcs.de/Andreas/Demo_Datalogger))
Slider to change background light
-> this information will be send to second VividCAN2 to remotely change background light. CAN -> CAN2ETH GW -> ETH tapping -> ETH2CAN GW Push buttons to send TC10 commands to SFP modules of RAD-GigaStar * Fire3/Red2:
Simulating Vehicle data
Embedded CAN-ETH Gateway * RAD-Galaxy2:
Tap device - ETH1 <-> ETH2 / AE01 <-> AE02 streams * RAD-GigaStar:
AE simulation (saw signal) - TX on AE01, RX on AE02.
Embedded CAN-ETH-CAN Gatewaying for CAN1/2 (see [Demo_VCAN42-Ind_CAN-ETH-GW](https://git.intrepidcs.de/Andreas/Demo_VCAN42-Ind_CAN-ETH-GW)) -> to dispaly Vehicle data on VividCAN2
* VividCAN2:
Display same Vehicle data as VividCAN1 but received ofer ethernet and ETH-CAN-GW Backlight can be adjusted localy or over VividCAN1 slider * VehicleSpy connected to:
Variant1:
RAD-GigaStar (device hosting on ETH1) to display Vehicle data (CAN->ETH)
saw signal from RAD-GigaStar (AE1 and AE2) and on RAD-Galaxy2 (AE3 and AE4 - only receive side)
Variant2: Red2/Fire3 to show original CAN data * Wireshark (with ICSCAP):
Monitoring the whole, tapped streams [LUA-File](./resources/WireShark_CAN_ETH_GW.lua) and [Coloring](./resources/WireShark_MessageColoring) availbable. ## Requirements * ["Remote" Datalogger](https://intrepidcs.com/products/data-loggers/) (e.g. neoVI-RED2/Fire3/Connect)
with CoreMini [Setup](RED2_Playback_and_Log_GW.vs3) and replay files [File1]('full%20trace%202022-06-10%2006-54-10-290994%20Partition%200.vsb') and [File2]('full%20trace%202022-06-10%2010-26-01-291045%20Partition%200.vsb') * Two VividCAN with CoreMini [Setup]('VividCAN%20Demo.vs3') * [RAD-Galaxy2](https://intrepidcs.com/products/automotive-ethernet-tools/rad-galaxy-2) * [RAD-GigaStar](https://intrepidcs.com/products/automotive-ethernet-tools/rad-gigastar-1000base-t1-active-tap-gateway-vehicle-interface) with CoreMini [Setup](GigaStar_CAN-ETH-GW.vs3)
(embedded CAN-ETH-CAN Gateway and device hosting) ## Hardware Setup ### Red2 & Fire3 Set ETH01 to 100Mbps full duplex for this demo ![RED2_ETH settings](./resources/pics/RED2_Fire3_settings_100MBit.png) Enable CMP on Red2/Fire3 - stream could be shown in ICSCAP ![RED2_CMP](./resources/pics/RED2_Fire3_settings_CMP.png) Enable embedded Gateway and download to CoreMini, disable afterwards before going onlin. ![RED2_embedded gateway](./resources/pics/RED2_Fire3_CAN1_ETH_GW.png) ### RAD-Galaxy2 Tapping and forwarding AE01/AE02 ![Galaxy2_Tapping](./resources/pics/Galaxy2_settings.png) Enableling AE01/AE02 + ETH01/ETH02/ETH03 - for Demo only 100Mbps ![Galaxy2_100Mbps](./resources/pics/Galaxy2_settings_100MBit.png) ### RAD-Gigastar2 Enable CoreMini if USB is connected to runn Script anyway ![GigaStar_Run CoreMini](./resources/pics/GigaStar_CoreMini_on_USB.png) Use independant networks on GigaStar (no tapping) ![GigaStar_Run CoreMini](./resources/pics/GigaStar_settings.png) Download embedded Gateway only to CoreMini, disable afterwards if running online ![GigaStar_Run CoreMini](./resources/pics/GigaStar_ETH_CAN_GW.png) ## Connections * Red2/Fire3 (DWCAN01) -> VividCAN1 + Power * Red2/Fire3 (ETH1) -> RAD-Galaxy2 (ETH1) * RAD-Galaxy2 (AE3) -> RAD-GigaStar (AE1) * RAD-Galaxy2 (AE4) -> RAD-GigaStar (AE2) * RAD-Galaxy2 (ETH3) -> RAD-GigaStar (SFP-ETH1) * RAD-GigaStar (DWCAN01) -> VividCAN2 + Power ## Setup I ### Showcase - Vehicle Spy Individual description of setup ## Setup II If multiple setups are available ### Showcase - Wireshark Individual description of setup (updated 08.12.2025) \ No newline at end of file +#### [Find Repositorys](https://git.intrepidcs.de/explore/repos) # Demo RAD-Galaxy2 ## General showcase Short description what will be demonstrated * VividCAN1:
Display Vehicle data (see: [Demo_Datalogger](https://git.intrepidcs.de/Andreas/Demo_Datalogger))
Slider to change background light
-> this information will be send to second VividCAN2 to remotely change background light. CAN -> CAN2ETH GW -> ETH tapping -> ETH2CAN GW Push buttons to send TC10 commands to SFP modules of RAD-GigaStar * Fire3/Red2:
Simulating Vehicle data
Embedded CAN-ETH Gateway * RAD-Galaxy2:
Tap device - ETH1 <-> ETH2 / AE01 <-> AE02 streams * RAD-GigaStar:
AE simulation (saw signal) - TX on AE01, RX on AE02.
Embedded CAN-ETH-CAN Gatewaying for CAN1/2 (see [Demo_VCAN42-Ind_CAN-ETH-GW](https://git.intrepidcs.de/Andreas/Demo_VCAN42-Ind_CAN-ETH-GW)) -> to dispaly Vehicle data on VividCAN2
* VividCAN2:
Display same Vehicle data as VividCAN1 but received ofer ethernet and ETH-CAN-GW Backlight can be adjusted localy or over VividCAN1 slider * VehicleSpy connected to:
Variant1:
RAD-GigaStar (device hosting on ETH1) to display Vehicle data (CAN->ETH)
saw signal from RAD-GigaStar (AE1 and AE2) and on RAD-Galaxy2 (AE3 and AE4 - only receive side)
Variant2: Red2/Fire3 to show original CAN data * Wireshark (with ICSCAP):
Monitoring the whole, tapped streams [LUA-File](./resources/WireShark_CAN_ETH_GW.lua) and [Coloring](./resources/WireShark_MessageColoring) availbable. ## Requirements * ["Remote" Datalogger](https://intrepidcs.com/products/data-loggers/) (e.g. neoVI-RED2/Fire3/Connect)
with CoreMini [Setup](RED2_Playback_and_Log_GW.vs3) and replay files [File1]('full%20trace%202022-06-10%2006-54-10-290994%20Partition%200.vsb') and [File2]('full%20trace%202022-06-10%2010-26-01-291045%20Partition%200.vsb') * Two VividCAN with CoreMini [Setup]('VividCAN%20Demo.vs3') * [RAD-Galaxy2](https://intrepidcs.com/products/automotive-ethernet-tools/rad-galaxy-2) * [RAD-GigaStar](https://intrepidcs.com/products/automotive-ethernet-tools/rad-gigastar-1000base-t1-active-tap-gateway-vehicle-interface) with CoreMini [Setup](GigaStar_CAN-ETH-GW.vs3)
(embedded CAN-ETH-CAN Gateway and device hosting) ## Hardware Setup ### Red2 & Fire3 Set ETH01 to 100Mbps full duplex for this demo ![RED2_ETH settings](./resources/pics/RED2_Fire3_settings_100MBit.png)\ Enable CMP on Red2/Fire3 - stream could be shown in ICSCAP ![RED2_CMP](./resources/pics/RED2_Fire3_settings_CMP.png)\ Enable embedded Gateway and download to CoreMini, disable afterwards before going onlin. ![RED2_embedded gateway](./resources/pics/RED2_Fire3_CAN1_ETH_GW.png) ### RAD-Galaxy2 Tapping and forwarding AE01/AE02 ![Galaxy2_Tapping](./resources/pics/Galaxy2_settings.png)\ Enableling AE01/AE02 + ETH01/ETH02/ETH03 - for Demo only 100Mbps ![Galaxy2_100Mbps](./resources/pics/Galaxy2_settings_100MBit.png) ### RAD-Gigastar2 Enable CoreMini if USB is connected to runn Script anyway ![GigaStar_Run CoreMini](./resources/pics/GigaStar_CoreMini_on_USB.png)\ Use independant networks on GigaStar (no tapping) ![GigaStar_Run CoreMini](./resources/pics/GigaStar_settings.png)\ Download embedded Gateway only to CoreMini, disable afterwards if running online ![GigaStar_Run CoreMini](./resources/pics/GigaStar_ETH_CAN_GW.png) ## Connections * Red2/Fire3 (DWCAN01) -> VividCAN1 + Power * Red2/Fire3 (ETH1) -> RAD-Galaxy2 (ETH1) * RAD-Galaxy2 (AE3) -> RAD-GigaStar (AE1) * RAD-Galaxy2 (AE4) -> RAD-GigaStar (AE2) * RAD-Galaxy2 (ETH3) -> RAD-GigaStar (SFP-ETH1) * RAD-GigaStar (DWCAN01) -> VividCAN2 + Power ## Setup I ### Showcase - Vehicle Spy Individual description of setup ## Setup II If multiple setups are available ### Showcase - Wireshark Individual description of setup (updated 08.12.2025) \ No newline at end of file