diff --git a/README.md b/README.md
index d805738..2304ab1 100644
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-#  10-Base-T1S Demos 
+#  10-Base-T1S Demos 
 
 # Check\_10BaseT1S\_Comet\_AE02.vs3  
 Check\_10BaseT1S\_Comet\_AE02\_1920x1080.vs3
@@ -11,17 +11,14 @@ This was started with Betaversion VehicleSpy \_3.9.19.3
 
 ## Graphical panel 2
 
-
-
-
+![Setup](resources/GP_02.bmp)
 
 
 ## Graphical panel 3
 
 Added for TEX2026
 
-
-
+![Setup](resources/GP_03.bmp)
 
 
 ## Showcase
@@ -31,10 +28,14 @@ Depending on the filtered message the graphical panel shows from which "node" th
 Graphical Panel 2:  
 New setups for [RAD-Comet2](https://store.intrepidcs.com/product/rad-comet-2) and [RAD-Comet3](https://store.intrepidcs.com/product/rad-comet-3) also will be able to show Symbols and Beacon   
 Graphical Panel 3:  
-For Testing Expo 2026 the setup additionally was extended to use RAD-Moon-T1S media converter and RAD-GigaStar2.  
+For Testing Expo 2026 the setup additionally was extended to use [RAD-Moon-T1S](https://intrepidcs.com/products/automotive-ethernet-tools/rad-moon-t1s-10baset1s-media-converter/) media converter 
+and [RAD-GigaStar2](https://intrepidcs.com/products/automotive-ethernet-tools/rad-gigastar2-1gbt1-t1s-active-tap-gateway-media-converter-vehicle-interface-data-logger/).  
 Within graphical panel 3 the same waveform from RAD-Meteor Nodes1 and 2 are shown, but received on AE03 of RAD-GigaStar2.
 
-WireShark could be used to visualize the 10-Base-T1S to 100-Base-T1 converted stream monitoring the RAD-Moon-T1S output. If ICSCAP driver is installed (copy ICSCAP.exe to \\Wireshark\\extcap) also Symbols and Beacon might be monitored – „malformed frames“ since it is no ethernet frame but internally extracted date in RAD-GigaStar2, RAD-Moon-T1S or RAD-Comet2/3
+WireShark could be used to visualize the 10-Base-T1S to 100-Base-T1 converted stream monitoring the RAD-Moon-T1S output. 
+If [ICSCAP](https://intrepidcs.com/products/software/ics-cap/) driver is installed (copy [ICSCAP.exe](https://cdn.intrepidcs.net/icscap/) 
+to \\Wireshark\\extcap) also Symbols and Beacon might be monitored – „malformed frames“ since it is no ethernet frame 
+but internally extracted data in RAD-GigaStar2, RAD-Moon-T1S or RAD-Comet2/3
 
 ## Requirements
 
@@ -90,9 +91,11 @@ Extended setup
 
 ## Usage
 
-1. Open the setup and check the RAD-Meteors MAC addesses in the AE02 network settings.\\
+1. Open the setup and check 
+the RAD-Meteors MAC addesses in the AE02/AE03 and AE06 network settings.\
+(T.B.D might be improved thru global settings with application signals)
 
-2. Go online with Vehicle Spy (e.g. with RAD-Comet). \\
+2. Go online with Vehicle Spy (e.g. with RAD-Comet).
 
 3. To start the individual nodes, press the yellow button and start "run".